38 mm reproduction cylinder kit for Puch Supermaxi LG1 / LG2 mopeds. This cylinder also fits Puch Maxi or Puch X30 mopeds, as it is equipped with smaller exhaust ports. In this case, however, the corresponding exhaust with a narrower outlet must be fitted.
The tuning cylinder has a larger inlet and outlet. Therefore, the cylinder has slightly more intake than the original counterpart.
The piston has two piston rings.
You can find suitable add-on parts in the accessories section.
Attention: The stud bolt distance on the intake side is only 32 mm. On the original cylinder, this is 38 mm. The holes on the intake manifold must therefore be widened slightly in order to be able to fit it.
| Nominal diameter | 38 mm |
| Material | Gray cast iron |
| Camouflaged | No |
| Surface | sandblasted |
| Displacement | 50 ccm |
| Crankshaft stroke | 43 mm |
| Thread inlet | M6x1 (standard thread) |
| Number of fixing points | 4 pcs |
| Hole spacing inlet | 32 mm |
| Ø piston pin (B) | 12 mm |
| Outlet type | slanted |
| Area of application | Tuning |
| Hole spacing outlet | 42 mm |
| Thread outlet | M6x1 (standard thread) |
| Hole pattern [mm] | 44 x 44 |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Thickness: 0.3 mm · Thickness: 0.4 mm · Thickness: 1.8 mm · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Ø cylinder: 38 mm · Ø outlet inside: 22 mm · Hole spacing inlet: 32 - 38 mm · Decompressor: Yes · Hole spacing outlet: 42 mm · Number of components: 4 pcs · Hole pattern [mm]: 44 x 44 mm
EUR 8.90
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Manufacturer: swiing® ingenious parts · Bearing cage: Silver cage · Bearing type: Needle roller and cage assembly · Width: 14.2 mm · Ø inside: 12 mm · Ø outside: 15 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony OEM number: A4222 · Tomos OEM number: 035548 · Alternative version of the Sachs OEM number: 0232 157 001
EUR 14.30
Moped fans also bought
GPO sprocket 40 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Surface: powder-coated · Color: black · Material: Steel · Hole spacing: 36.5 mm · Number of teeth: 40 pcs · Ø mounting hole: 6.7 mm · Ø inside: 94 mm · Ø bolt circle: 106 mm · Hole spacing 2: 68 mm · Number of fixing points: 6 pcs · Cranking (offset): 8 mm
EUR 23.90
NSK E20 shoulder ball bearing
Material: Brass · Manufacturer: NSK · Surface: blank · Bearing type: Deep groove ball bearing · Inner ring width: 12 mm · Ø outside: 47 mm · Bearing clearance: CN (standard) · Bearing cage: Brass cage ball-guided · Width: 12 mm · Stock number: E20 · Ø inside: 20 mm · Ball bearing closed: No
EUR 29.90
NSK L17 shoulder ball bearing
Stock number: L17 · Inner ring width: 10 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Bearing cage: Brass cage ball-guided · Surface: blank / oiled · Material: Brass · Bearing type: Shoulder bearing · Material: Steel · Width: 10 mm · Ø inside: 17 mm · Ø outside: 40 mm · Ball bearing closed: No · Area of application: Standard
EUR 23.40
Oil seal NBR 17/35/7 AS crankshaft | Puch X30
Temperature resistance (min.): -30 - 100 °C · Simmering type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Width: 7 mm · Place of use: Crankshaft · Manufacturer: Puch · Material: NBR · Surface: rubberized · Ø inside: 17 mm · Ø outside: 35 mm
EUR 9.50
Collection only possible with online purchase and appointment.
