Revised 2021 version of one of the best available cylinders including cylinder head for Piaggio mopeds / mopeds with 12 mm piston pin.
This cast iron cylinder offers a very good power increase over the entire speed range and makes it one of the most popular 73.5 cc racing cylinder for Piaggio engines.
The workmanship is very clean and the matching of the piston windows to the overflow channels and boost parts is very good. The webs in the area of the cylinder head significantly reduce the risk of piston jamming and make the cylinder extremely durable. The cylinder head with its small combustion chamber and large flat sealing surface ensures good compression. Thanks to the additional cooling fins on the sides, this racing cylinder head can dissipate the resulting heat even better and thus protects the racing set from overheating.
Note: Before initial installation, the deco pin must be hammered into the valve seat. To do this, place the cylinder head on a stable surface with the valve ribs facing downwards and insert the pin. The deco pin must then be brought into the correct fit using a medium-strength punch and a slotted screwdriver or punch (Ø 4-6 mm). This method is unusual, but recommended by Malossi. The remaining parts required to complete the valve must be taken from the original valve.
This cylinder kit requires long-threaded spark plugs.
Attention: In order to install this cylinder on a Piaggio case, the case must be milled or hollowed out.
Alternatively, a racing case with a larger diameter can be used for the cylinder mount.
You can find other add-on parts such as long-threaded spark plugs in the accessories section.
Quality product from the Italian manufacturer Malossi.
The set includes the following fixed parts:
Manufacturer: Malossi · Material: Gray cast iron · Surface: sandblasted · Displacement: 73 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 46.5 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 3 pcs · Decompressor: Yes · Camouflaged: No · Area of application: Tuning · Ø cylinder neck: 50 mm · Ø Outlet outside: 22.4 mm · Ø outlet inside: 18.1 mm · Hole pattern [mm]: 55 x 34
Hole pattern [mm]: 35 x 55 · Manufacturer: Malossi · Material: Aluminum · Surface: sandblasted · Ø cylinder: 44 - 47 mm · Camouflaged: No · Number of fixing points: 3 pcs · Candle thread: long · Decompressor: Yes · Total length: 122 mm · Width: 87 mm · Height: 60 mm · Area of application: Racing
Details
| Manufacturer | Malossi |
| Material | Gray cast iron |
| Surface | sandblasted |
| Displacement | 70 ccm |
| Area of application | Tuning |
| Nominal diameter | 46.5 mm |
| Crankshaft stroke | 43 mm |
| Number of fixing points | 3 pcs |
| Ø piston pin (B) | 12 mm |
| Outlet type | clamped |
| Decompressor | Yes |
| Camouflaged | No |
Suitable for the following models
| Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo |
Accessories & related products
Dell'Orto 19 mm PHBG CS carburetor hand choke
Width: 70 mm · Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Color: black · Area of application: Racing · Area of application: Tuning · Nominal diameter: 19 mm · Carburetor type: PHBG CS · Choke control: Hand choke · Total length: 82 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Ø Internal connection: 24 mm · Ø Output inside: 19 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Height: 124 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mounting type: Plug connection clamped · Mixed oil connection: Yes · Vacuum connection: Yes · Choke nozzle size: 60 · Camouflaged: No · Nozzle size: 75 · Size of secondary nozzle: 45
EUR 144.30
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Material: Steel · Surface: burnished · Area of application: (Dis)assembly tool · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm · Total length: 130 mm · Number of components: 7 pcs
EUR 21.50
EUR 24.00
Malossi piston 46.5 mm (12 mm KoBo) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Malossi · Nominal diameter: 46.5 mm · Ø outside piston (A): 46.4 mm · Compression height (C): 25.9 mm · Curvature (D): 2.4 mm · Total piston height (E): 52.8 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Ø piston pin (B): 12 mm · Piston weight: 101 g
EUR 105.80
Not in stock
Polini Speed Engine electronic ignition housing | Piaggio Ciao, SI, Bravo, Boxer
Width: 175 mm · Manufacturer: Polini · Material: Aluminum · Surface: sandblasted · Color: silver · Stock number: 6202 · Crankshaft stroke: 43 mm · Ignition type: Electronic · Height: 104 mm · Total length: 215 mm
EUR 252.60
Malossi 46.5 mm cylinder kit incl. head 12 mm KoBo | Piaggio SI, Bravo, Grillo
Nominal diameter: 46.5 mm · Manufacturer: Malossi · Material: Gray cast iron · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 3 pcs · Decompressor: Yes · Camouflaged: No · Area of application: Tuning
EUR 216.50
Not in stock
NGK B7ES spark plug long thread
Manufacturer: NGK · Candle designation: B7ES · Candle thread type: long · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Thread type: MF14x1.25 (fine pitch thread) · Spark plug socket: M4 · Spark plug socket: SAE · Suppressed: No · Width across flats SW: 21 mm
EUR 7.80
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing cage: Silver cage · Width: 14.2 mm · Manufacturer: swiing® ingenious parts · Bearing type: Needle roller and cage assembly · Ø inside: 12 mm · Ø outside: 15 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony OEM number: A4222 · Alternative version of the Sachs OEM number: 0232 157 001 · Tomos OEM number: 035548
EUR 14.30
swiing® ingenious 19 mm PHBG intake manifold Speed Engine (Version 2.0) | Piaggio Ciao, SI, Bravo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: graphite colors · Area of application: Tuning · Number of fixing points: 2 pcs · Ø inside: 19 mm · Ø External connection: 24 mm · Hole spacing inlet: 36 mm · Mounting type: Screws
EUR 36.00
GPO stator electronic ignition with light (three outputs) | Piaggio Ciao, SI, Bravo, Boxer
Cable length: 100 mm · Cable length: 400 mm · Manufacturer: GPO · Number of cables: 6 pcs · Tension: 12 V · Performance: 90 W · Number of fixing points: 3 pcs · Ø inside: 29.5 mm · Ø outside: 105 mm · Hole spacing: 34.5 mm · Piaggio OEM number: 219965
EUR 144.30
swiing® ingenious stud bolt M7x120 / Ø 7.3 shank - 10.9 strength
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Diameter: 7.3 mm · Thread type: M7x1 (standard thread) · Total length: 120 mm · Thread length: 20 mm · Thread length: 30 mm · Strength class: 10.9
EUR 5.90
Moped fans like you also bought:
EFFE Condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: EFFE · Capacity: 0.26 µF · Area of application: Original · Area of application: Standard · Mounting type: Tab for screwing · Connection type: Cable for screwing · Ø mounting hole: 4.4 mm · Ø outside: 18 mm · Height: 26 mm · Piaggio OEM number: 102939
EUR 14.30
SITO Plus exhaust Ø 24 mm | Piaggio Ciao, Bravo
Manufacturer: SITO · Material: Steel · Color: black · Surface: varnished · Ø Silencer: 70 mm · Number of fixing points: 1 pcs · Ø Internal connection: 22 mm · Ø outside: 14 mm · Ø Flame tube outside: 24 mm · Exhaust type: Cylindrical · Total length: 690 mm · Mounting type: Welded lug · Flame tube attachment: Plug connection clamped
EUR 90.10
Malossi air filter | Piaggio Ciao, SI, Bravo, Boxer
Width: 95 mm · Manufacturer: Malossi · Material: Plastic · Color: black · Area of application: Tuning · Filter type: Foam · Ø Internal connection: 51 mm · Ø outside: 53.2 mm · Height: 88.7 mm · Total length: 31.2 mm · Mounting type: Plug connection clamped · Camouflaged: No
EUR 24.00
Malossi cylinder head for 44 - 47 mm cylinder kit | Piaggio Ciao, Bravo 1, Boxer
Width: 87 mm · Manufacturer: Malossi · Material: Aluminum · Surface: sandblasted · Area of application: Racing · Ø cylinder: 44 - 47 mm · Number of fixing points: 3 pcs · Candle thread: long · Height: 60 mm · Total length: 122 mm · Hole pattern [mm]: 35 x 55 · Decompressor: Yes · Camouflaged: No
EUR 96.20
Not in stock
Malossi 46.5 mm cylinder kit without head 12 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Malossi · Material: Gray cast iron · Surface: sandblasted · Area of application: Tuning · Displacement: 73 ccm · Nominal diameter: 46.5 mm · Crankshaft stroke: 43 mm · Ø cylinder neck: 50 mm · Ø Outlet outside: 22.4 mm · Ø outlet inside: 18.1 mm · Number of fixing points: 3 pcs · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 55 x 34 · Decompressor: Yes · Camouflaged: No
EUR 174.40
GPO breaker without cable (version 2.0) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Material: Steel · Area of application: Original · Area of application: Standard · Cable available: No · Number of fixing points: 1 pcs · Ø axle: 5 mm · Ø mounting hole: 5 mm · Piaggio OEM number: 103133
EUR 11.90
swiing® revival condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Capacity: 0.28 µF · Area of application: Original · Area of application: Standard · Mounting type: Tab for screwing · Connection type: Cable for screwing · Ø mounting hole: 4.4 mm · Ø outside: 18 mm · Height: 26 mm · Piaggio OEM number: 102939
EUR 14.30
swiing® revival stud bolt set M7x120 mm cylinder | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 6.2 mm · Thread type: M7x1 (standard thread) · Drive: External hexagon · Width across flats SW: 11 mm · Total length: 120 mm · Thread length: 25 mm · Strength class: 8 · Strength class: 8.8
EUR 14.10
Collection only possible with online purchase and appointment.
