High-quality, simple number plate holder made of black plastic with «mofakult» imprint for your moped / moped.
The number holder is attached to the rear mudguard or the side number holder. There are seven attachment points available for this purpose. If new holes need to be drilled into the mudguard, marking them in advance makes it easier to position them optimally.
After the license plate holder has been attached, the number plate is then fastened with two M5 screws. Extra threaded holes have been embedded in the plastic for this purpose. The use of spring washers is recommended to secure the number plate.
You can find the corresponding screws for the number frame in the accessories section.
Merchandise product of the Swiss quality brand mofakult Merch.
Details
| Width | 108 mm |
| Manufacturer | mofakult Merch |
| Material | Plastic |
| Color | black |
| Thread type | M5x0.8 (standard thread) |
| Total length | 175 mm |
| Number of fixing points | 9 pcs, 2 pcs |
| Ø mounting hole | 6 mm |
| Height | 11 mm |
| Hole spacing | 50 mm |
| Thread length | 6 mm |
| Mounting type | Nuts & bolts |
Accessories & related products
Plastic license plate holder
Width: 108 mm · Manufacturer: Made in Switzerland · Material: Brass · Material: Plastic · Color: black · Thread type: M5x0.8 (standard thread) · Total length: 175 mm · Number of fixing points: 9 pcs · Ø mounting hole: 6 mm · Height: 11 mm · Hole spacing: 50 mm · Mounting type: Nuts & bolts · Thread length: 6 mm
EUR 9.50
Serrated lock washer M4 - M12 galvanized
Material: Steel · Surface: galvanized (blue) · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8 · Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm
EUR 0.35
M6x22 hexagon head screw, galvanized
Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Color: silver · Area of application: Standard · Drive: External hexagon · Thread type: M6x1 (standard thread) · Total length: 26 mm · Screw head: Hexagon · Thread length: 22 mm · Width across flats SW: 10 mm · Strength class: 8.8
EUR 1.35
Screw M5x10 pan-head hexagon socket, galvanized
Material: Steel · Surface: galvanized (blue) · Drive: Hexagon socket · Thread type: M5x0.8 (standard thread) · Total length: 13 mm · Screw head: Lens head · Ø External head: 9.5 mm · Shank: No · Thread length: 10 mm · Width across flats SW: 3 mm · Strength class: 10.9
EUR 1.10
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Number of components: 2 pcs · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Drive: Slot · Ø Cable bushing: 1.6 mm · Total length: 6 mm · Screw head: Lens head · Ø outside: 5 mm · Thread length: 4 mm
EUR 2.40
Continental 2.00 - 2.50 x 16" tube
Manufacturer: Continental · Tire width [inch]: 2 - 2.5 " · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire width [mm]: 50.8 - 63.5 · Wheel size [inch]: 16 " · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Tire height [%]: 100 · Valve type: TR6 car valve
EUR 17.40
Stand 14 mm axle (1A quality) | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Material: Steel · Color: black · Surface: varnished · Stand base - center mount (A): 232 mm · Total width of stand base (B): 200 mm · Wide receptacle (C): 78 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 250 mm
EUR 36.00
Headlight black | Piaggio Ciao PX, C24
Width: 125 mm · Manufacturer: Made in Italy · Test mark: none · Tension: 6 V · Tension: 12 V · Color: black · Area of application: Original · Housing material: Plastic · Area of application: Standard · Lens material: Plastic · Bulb holder: P26s · Number of fixing points: 2 pcs · Depth: 147 mm · Ø External connection: 6.3 mm · Speedometer recording: 48 mm · Switch included: Yes · Height: 90 mm · Battery operated: No · Mounting type: Screws · Piaggio OEM number: 584240
EUR 45.60
Tail light black | Piaggio Ciao PX, C24, Bravo
Width: 130 mm · Manufacturer: Made in Italy · Material: Plastic · Test mark: none · Color: black · Color: red · Bulb holder: BA9s · Number of fixing points: 2 pcs · Depth: 43 mm · Height: 58 mm · Brake light: No · Battery operated: No · Reflectors: Yes · Mounting type: Nuts & bolts
EUR 22.70
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Color: black · Quantity: 4 pcs · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Total length: 1350 mm · Total length: 1600 mm · Outer shell length: 2000 mm · Total length: 2180 mm
EUR 24.00
Collection only possible with online purchase and appointment.
