Interchangeable number holder for your moped, moped and small motorcycle.
Everyone who owns more than one moped and doesn't ride around on two at the same time like Jean-Claude Van Damme should definitely get this practical interchangeable number holder.
This way, one and the same number can be changed from one moped to the next within seconds. This saves time and money.
The number holder system impresses with its sophisticated yet simple functionality.
The spring plate is either attached directly to the license plate or to a license plate frame as listed in the accessories.
The black anodized aluminium block with the corresponding recesses is mounted directly on the moped frame.
With light pressure and a little momentum, the number is pushed smoothly into the locking position. This is bombproof - even in snow, rain and strong winds.
Scope of delivery as shown in Figure 1.
Figures 3 & 4 illustrate the mounted number holder.
This table gives you an overview of how many mopeds can be mounted on a license plate in the relevant cantons of Switzerland and Liechtenstein.
| Aargau | 19 |
| Appenzell A.-Rh. | 1 |
| Appenzell I.-Rh. | 5 |
| Basel-Landschaft | 99 |
| Basel-City | 99 |
| Bern | unlimited |
| Freiburg | unlimited |
| Genève | 2 |
| Glarus | 1 |
| Graubünden | unlimited |
| Jura | unlimited |
| Liechtenstein | 2 |
| Lucerne | 99 |
| Neuchâtel | 2 |
| Nidwalden | 30 |
| Obwalden | 30 |
| Schaffhausen | 50 |
| Schwyz | unlimited |
| Solothurn | unlimited |
| St. Gallen | unlimited |
| Ticino | unlimited |
| Thurgau | unlimited |
| Uri | 1 |
| Waadt | 2 |
| Wallis | unlimited |
| Zug | 19 |
| Zürich | 19 |
Excellent quality from the premium custom brand 66HEROES.
The following video explains the details and installation of the replacement number holder in detail:
| Manufacturer | 66HEROES |
| Surface | anodized |
| Color | black |
| Material | Aluminum |
| Number of fixing points | 2 pcs |
| Mounting type | Nuts & bolts |
| Universal | |
| Puch | |
| Sachs | |
| Pony / Cilo (Beta 521 & 512) | |
| Piaggio | Ciao - PX Si Bravo / Super Bravo Boxer Grillo |
| Zündapp Belmondo | |
| Solex | |
| Tomos | |
| Bye Bike | |
| Alpa Chopper / Turbo |
| Cilo | |
| DKW | |
| Fantic | Issimo |
| Garelli | |
| Honda | |
| Hercules | |
| ILO / JLO | |
| Kreidler | Flory MF Foil |
| Malaguti | |
| MBK | |
| Miele | |
| Motobecane | |
| Monark | |
| Peugeot | |
| Victoria | |
| Yamaha | |
| Zündapp |
Accessories & related products
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Total length: 145 mm · Color: silver · Number of fixing points: 2 pcs · Thread length: 8 mm · Thread type: M5x0.8 (standard thread) · Width: 105 mm · Mounting type: Nuts & bolts · Height: 5.3 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Ø mounting hole: 5 mm
EUR 13.10
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Contents [ml]: 10 ml · Area of application: Chemistry · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Color: blue · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.30
EUR 2’630.00/l
66HEROES interchangeable number holder set
Manufacturer: 66HEROES · Material: Aluminum · Material: Spring steel · Surface: brushed · Surface: electropolished · Color: black · Number of fixing points: 2 pcs · Thread type: M5x0.8 (standard thread) · Mounting type: Bayonet lock · Mounting type: Nuts & bolts
EUR 35.90
GPO license plate holder Inox black (CH version)
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Surface: varnished · Total length: 147 mm · Color: black-matt · Number of fixing points: 6 pcs · Thread type: M5x0.8 (standard thread) · Width: 105 mm · Mounting type: Nuts & bolts · Height: 6 mm · Ø mounting hole: 5 mm
EUR 15.50
Moped fans also bought
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Total length: 145 mm · Color: silver · Number of fixing points: 2 pcs · Thread length: 8 mm · Thread type: M5x0.8 (standard thread) · Width: 105 mm · Mounting type: Nuts & bolts · Height: 5.3 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Ø mounting hole: 5 mm
EUR 13.10
Bumm mirror round Inox
Manufacturer: Bumm · Material: Chrome steel (known as Nirosta®) · Material: Steel · Surface: chrome-plated · Thread size: M8 · Color: Chrome · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Mirror rod length: 300 mm · Clamping diameter: 22 mm · Thread type: M8x1.25 (standard thread) · Total length: 360 mm
EUR 29.90
Hot 
VEC electronic ignition coil (replaces ignition coil, capacitor & contact breaker)
Color: black · Total length: 77 mm · Height: 48 mm · Place of use: Internal (in the ignition) · Manufacturer: VEC · Mounting type: Screws · Number of fixing points: 2 pcs · Hole spacing: 54 mm · Ø mounting hole: 4.6 mm · Ø cable holder: 5 mm · Area of application: Original · Area of application: Performance · Area of application: Standard · Cable length: 140 mm · Cable length: 420 mm · Ø Internal flywheel: 90 mm
EUR 120.00
Not in stock
66HEROES interchangeable number holder set
Manufacturer: 66HEROES · Material: Aluminum · Material: Spring steel · Surface: brushed · Surface: electropolished · Color: black · Number of fixing points: 2 pcs · Thread type: M5x0.8 (standard thread) · Mounting type: Bayonet lock · Mounting type: Nuts & bolts
EUR 35.90
Collection only possible with online purchase and appointment.
