Vintage grip set made of black rubber for your moped, moped and small motorcycle with automatic transmission.
Thanks to their shape and appealing design, these handlebar grips adapt perfectly to your hands and provide a pleasant riding experience. These grips give your retro and classic bike the finishing touch.
One set consists of one grip cover each with an inner diameter of 22 or 24 mm.
For a manual moped, moped or small motorcycle that requires two grip covers with an inner diameter of 24 mm, this item must be ordered twice. The handle ends are closed except for a small hole, but can be opened individually if required (e.g. for mounting a side mirror).
Total length: 123 mm
Ø outside (operating surface): 33 - 39 mm
For easier installation, the rubber grips can be placed in warm water or sprayed on the inside with GPO Grip Spray. If you dare, you can also use mummy's hairspray.
Mounting material for the grip covers, as well as other rubber grips and complete grip sets can be found in the accessories section.
Excellent quality from the premium custom brand 66HEROES.
| Manufacturer | 66HEROES |
| Material | Rubber |
| Surface | raw |
| Color | black |
| Ø inside | 22 mm, 24 mm |
| Total length | 123 mm |
| Ø outside | 33 mm, 39 mm |
Accessories & related products
Lusito handle set automatic aluminum black (short gas)
Ø inside: 22 mm · Ø inside: 24 mm · Color: black · Color: orange · Color: silver · Total length: 130 mm · Total length: 150 mm · Manufacturer: Lusito · Number of components: 6 pcs · Material: Rubber · Housing material: Aluminum · Surface: powder-coated · Material lever: Aluminum
EUR 60.20
Not in stock
Explore categories from Handles & fittings
Moped fans also bought
Hot 
swiing® ingenious exhaust 22 mm camouflaged 2-piece | Puch Maxi S, N
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 59 mm · Ø Silencer: 54.5 mm · Total length: 910 mm · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Number of fixing points: 4 pcs · Flame tube attachment: Flange
EUR 162.70
Hot
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 3.94 mm · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Chain lock type: Spring lock · Rolling circumference: 1626 mm · Ø bore: 4 mm
EUR 15.10
Inox
Hot
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Thread type: M5x0.8 (standard thread) · Total length: 145 mm · Mounting type: Nuts & bolts · Width: 105 mm · Thread length: 8 mm · Height: 5.3 mm · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Number of fixing points: 2 pcs
EUR 13.10
GPO 15 mm carburetor tuning | Puch
Width: 50 mm · Height: 95 mm · Manufacturer: GPO · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Total length: 66 mm · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m
EUR 78.30
GPO license plate holder Inox black (CH version)
Surface: varnished · Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: black-matt · Width: 105 mm · Thread type: M5x0.8 (standard thread) · Height: 6 mm · Total length: 147 mm · Mounting type: Nuts & bolts · Number of fixing points: 6 pcs · Ø mounting hole: 5 mm
EUR 15.60
Working late? Evening hours on Thursday until 20:00
