44 mm piston, compatible with your Puch Maxi S / N, Supermaxi LG1 / LG2, as well as your X30 Sport NS / NL moped with an E50 / ZA50 (air-cooled) / ZA50 (catalytic converter) or Z50 engine.
This replacement piston with a 44 mm diameter is suitable as a replacement part for the modified CH12 AKOA Puch cylinder with 65 ccm. You’ll find the detailed dimensions of the piston, as per the technical drawing, in the product specifications. The piston kit comes complete with piston rings, a piston pin, and retaining rings, so you’ll have everything you need for installation.
Notes:
The piston is installed with the arrow pointing toward the exhaust. Also note the installation direction of the piston rings: The “R” marking points toward the cylinder head.
You can find the matching cylinder and all replacement parts in the accessories section.
Brand-name product from the manufacturer AKOA.
| Material | Aluminum |
| Surface | molybdenum-coated |
| Manufacturer | AKOA |
| Nominal diameter | 44 mm |
| Ø outside piston (A) | 43.98 mm |
| Ø piston pin (B) | 12 mm |
| Compression height (C) | 22.54 mm |
| Curvature (D) | 3.44 mm |
| Total piston height (E) | 52.45 mm |
| Number of piston rings (F) | 2 pcs |
| Piston ring mold | Rectangular ring |
| Piston ring impact | Internal fuse (IS) |
| Piston ring height | 1.46 mm |
| Thick piston ring | 1.76 mm |
| Weight piston kit | 90.86 g |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Number of components: 7 pcs · Material: Steel · Surface: burnished · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Total length: 130 mm · Area of application: (Dis)assembly tool · Width across flats: 10 mm · Width across flats: 17 mm
EUR 24.00
GPO gasket set cylinder 45 mm Puch
Manufacturer: GPO · Material: Aluminum · Material: Sealing carton · Ø cylinder: 45 mm · Number of components: 4 pcs · Hole spacing inlet: 38 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Hole spacing outlet: 42 mm · Area of application: Tuning
EUR 9.55
Not in stock
Explore categories from Piston
Moped fans also bought
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Number of components: 7 pcs · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Area of application: Standard · Hole spacing inlet: 32 - 38 mm · Decompressor: Yes · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm
EUR 11.90
EUR 10.70
DMP crankshaft "original" with mounted bearings | Puch E50
Thread type: MF10x1 (fine pitch thread) · Manufacturer: DMP · Material: Steel · Cheek type: standard · Crankshaft stroke: 43 mm · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø piston pin (B): 12 mm · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread length: 10 mm · Dimension needle bearing: 12 / 15 x 14.2 (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.6 mm · Weight: 873 g · Number of gears: 1 pcs · Area of application: Standard
EUR 156.70
Working late? Evening hours on Thursday until 20:00
