Not so nice 
Wheel bearing cone with M12 x 1 mm thread for front wheel and rear wheel on your moped, moped or small motorcycle.
Wrench width: 16.9 mm
Height: 14.5 mm
Ø outer: 20 mm
The track is suitable for 3/16" (Ø 4.78 mm), 7/32" (Ø 5.56 mm), 1/4" (Ø 6.35 mm) balls, but the pitch must be observed.
Corresponding bearing balls, wheel axles, wheel nuts and other attachments can be found in the accessories section.
Price per piece
Mäsig-läsig! – We strive to offer you the widest range of moped spare parts. However, this product is of rather poor quality and is not recommended by us. Should you nevertheless choose this item, we understand, but we cannot offer you any guarantee or exchange.
These cones have a soft surface and are therefore not suitable for professional use.
High-quality alternatives can be found in the accessories section.
| Width across flats SW | 16.9 mm |
| Material | Steel |
| Surface | galvanized (blue) |
| Height | 14.5 mm |
| Ø outside | 20 mm |
| Thread type | MF12x1 (fine pitch thread) |
| Ø ball [inch] / [mm] | 3/16" (4.78 mm), 7/32" (5.56 mm), 1/4" (6.35 mm) |
| Puch | |
| Sachs |
Accessories & related products
Nut M12x1 x 5 SW19 Wheel nut galvanized
Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nut type: Hexagon nut 0.5D · Drive: External hexagon · Thread type: MF12x1 (fine pitch thread) · Strength class: 8 · Height: 5.8 mm · Width across flats SW: 19 mm · Pony OEM number: A4249 · Sachs OEM no.: 0242 124 000
EUR 2.15
swiing® revival wheel axle M12x1 x 165 ball bearing, galvanized version
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.95 mm · Total length: 165 mm · Thread length: 40 mm · Thread length: 50 mm · Shank length: 75 mm
EUR 15.50
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Mounting type: Union nut · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11.90
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Component group Carburetor: Sealing, revising · Surface: blank · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Material: Sealing paper · Thickness: 1.5 mm · Ø inside: 41 mm · Ø outside: 45 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3.35
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Ø nipple: 6 mm · Manufacturer: Made in Germany · Area of application: Standard · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.2 mm · Cable length: 2000 mm · Material: Brass · Material: Steel · Nipple shape: Barrel (transverse) · Nipple length: 5.5 mm
EUR 4.10
Not in stock
Nut M12x1 x 10 SW19 Wheel nut Inox
Material: Chrome steel (known as Nirosta®) · Surface: blank · Area of application: Standard · Nut type: Hexagon nut 1D · Drive: External hexagon · Strength class: A2-70 · Thread type: MF12x1 (fine pitch thread) · Height: 10 mm · Width across flats SW: 19 mm
EUR 4.70
Nut M12x1 x 5 SW19 Wheel nut galvanized
Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nut type: Hexagon nut 0.5D · Drive: External hexagon · Thread type: MF12x1 (fine pitch thread) · Strength class: 8 · Height: 5.8 mm · Width across flats SW: 19 mm · Pony OEM number: A4249 · Sachs OEM no.: 0242 124 000
EUR 2.15
Collection only possible with online purchase and appointment.
