Einbauanleitung Bollag
Throttle cable rocker for your converted Piaggio Wideframe Vespa scooter with Polini CP or Dell'Orto PHBG carburettor round slide
.The sophisticated and thoroughly tested geometric arrangement ensures smooth and controlled opening of the slide. The cable adapter has been designed so that the carburetor can be controlled while retaining the original cable routing.
Fits the following upgraded vehicles:
Vespa V1 - V15, V30 - V33, VM, VN, VU, 150 VL, VB
ACMA 125 (1951-1955), 150 GL (1956-1958)
Motovespa 125N (1953-1958)
Hoffmann Vespa 125 A/B/C
All components required for installation are included in the scope of delivery.
You can download the illustrated installation instructions as a PDF file.
Quality product from the Swiss manufacturer Bollag Motos.
| Manufacturer | Bollag Motos |
| Component group Carburetor | Adjusting screws, float, etc. |
| Carburetor type | CP, PHBG |
| Ø mounting hole | 4.3 mm |
| Number of fixing points | 2 pcs |
Ratings
Accessories & related products
Bollag Motos needle bearing 20/42/18 main shaft | Vespa Wideframe
Manufacturer: Bollag Motos · Material: Steel · Bearing type: Bearing ring · Bearing type: Needle sleeve · Ø inside: 20 mm · Ø outside: 41 mm · Ø outside: 42 mm · Width: 18.1 mm · Dimension needle bearing: 20x42x18
EUR 72.70
Not in stock
Bollag Motos carburetor Polini CP23 without choke | Vespa Wideframe VB1
Nominal diameter: 19 mm · Manufacturer: Bollag Motos · Component group Carburetor: Carburetor complete · Carburetor type: CP · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Nozzle size: 66 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Width: 66 mm · Height: 135 mm · Ø Air filter connection: 46 mm · Mounting type: Plug connection clamped · Ø Internal connection: 19.8 mm · Total length: 73.5 mm · Nozzle block: 35-12 · Size of secondary nozzle: 38 · Size of secondary nozzle: 40 · Size of secondary nozzle: 42
EUR 212.40
Not in stock
Moped fans also bought
M10 sealing ring Fiber
Material: Fiber · Surface: raw · Place of use: Carburetor · Place of use: Motor housing · Ø inside: 10 mm · Thickness: 1.6 mm · Ø outside: 13.8 mm · Area of application: Standard · Pony OEM number: A1817 · Pony OEM number: A5650 · Puch OEM number: 27071 · Sachs OEM no.: 0250 042 001 · Sachs OEM no.: 0650 131 000
EUR 1.95
Polini CP 23 mm carburetor (cable choke) rubber flange
Nominal diameter: 23 mm · Manufacturer: Polini · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: CP · Choke control: Cable choke · Total length: 71 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Nozzle size: 110 · Ø Inside entrance: 42 mm · Width: 66 mm · Ø Output inside: 25 mm · Height: 132 mm · Ø Air filter connection: 47 mm · Mounting type: Rubber sleeve · Mixed oil connection: Yes · Vacuum connection: Yes · Nozzle block: 35-12 · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Size of secondary nozzle: 40
EUR 169.90
Surflex clutch plate set 3.3 mm | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A3887 / A1908)
Thickness: 3.3 mm · Manufacturer: Surflex · Ø outside: 94.2 mm · Ø outside: 101 mm · Material: Steel · Recording type: Interlocking · Number of slats: 2 pcs · Ø inside: 29.7 mm · Ø inside: 36 mm · Ø inside: 46 mm · Area of application: Original · Pony OEM number: A1908 · Pony OEM number: A3887 · Sachs OEM no.: 0659 010 006
EUR 54.50
Collection only possible with online purchase and appointment.
