Bing SSE 15 mm aftermarket tuning carburetor suitable for ILO / JLO mopeds / mopeds.
The racing carburetor also fits Puch MS, VS, MV and DS small engine bikes, provided the additional flange (item 23645) is used.
If necessary, small adjustments are required to ensure the air filter fits perfectly.
We recommend the adjustable nozzle (item 16038), which allows the fuel/air mixture to be optimally adjusted.
Hole spacing for cylinder connection: 32 mm
Main diameter: 14
You can find the slanted intake manifold described above, other carburetors and the innovative adjustable nozzle in the accessories section.
| Nominal diameter | 15 mm |
| Component group Carburetor | Carburetor complete |
| Carburetor type | SSE |
| Choke control | Cable choke |
| Ø fuel hose connection | 6 mm |
| Mounting type | Flange |
| Hole spacing inlet | 32 mm |
| Area of application | Standard, Tuning |
| Puch | 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| ILO / JLO |
Ratings
Accessories & related products
BING SSE carburetor 12 mm | Puch MV 50, MS 50
Component group Carburetor: Carburetor complete · Area of application: Standard · Area of application: Tuning · Choke control: Hand choke · Carburetor type: SSE · Nominal diameter: 12 mm · Ø fuel hose connection: 6 mm · Mounting type: Flange · Nozzle size: 50 · Hole spacing inlet: 32 mm
EUR 96.20
BING Original floats Bing SSB, SSE & SSN
Manufacturer: BING · Component group Carburetor: Adjusting screws, float, etc. · Ø outside: 22 mm · Carburetor type: SSB · Carburetor type: SSE · Carburetor type: SSN · Color: black · Total length: 41.4 mm · Height: 23 mm · Pony OEM number: A1968 · Sachs OEM no.: 0261 003 001
EUR 34.80
Not in stock
Flange intake manifold angled with stud bolt | Puch MS, VS, MV and DS
Total height: 2.7 mm · Total height: 9.7 mm · Material: Aluminum · Area of application: Tuning · Thread type: M6x1 (standard thread) · Ø inside: 15 mm · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Hole spacing inlet: 32 mm
EUR 31.90
BING SSE carburetor 12 mm cable choke | ILO / Puch MV, MS, DS
Component group Carburetor: Carburetor complete · Carburetor type: SSE · Nominal diameter: 12 mm · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Ø fuel hose connection: 6 mm · Choke control: Cable choke · Nozzle size: 50 · Mounting type: Flange · Hole spacing inlet: 32 mm · Area of application: Standard · Area of application: Tuning
EUR 103.50
Moped fans also bought
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Number of components: 10 pcs · Material: Sealing paper · Ø outlet inside: 22 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Area of application: Standard
EUR 24.00
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Surface: sandblasted · Width: 125 mm · Ø cylinder: 45 mm · Height: 55 mm · Total length: 135 mm · Number of fixing points: 4 pcs · Candle thread: short · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 39.60
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing type: Shoulder bearing · Stock number: E15 · Ø inside: 15 mm · Ø outside: 35 mm · Inner ring width: 8 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CN (standard) · Bearing cage: Brass cage ball-guided · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Area of application: Standard · Width: 8 mm · Pony OEM number: A1149 · Sachs OEM no.: 0232 017 006
EUR 30.00
Flange intake manifold angled with stud bolt | Puch MS, VS, MV and DS
Total height: 2.7 mm · Total height: 9.7 mm · Material: Aluminum · Area of application: Tuning · Thread type: M6x1 (standard thread) · Ø inside: 15 mm · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Hole spacing inlet: 32 mm
EUR 31.90
Collection only possible with online purchase and appointment.
