Original 1.2 hp clutch with 56 mm for Piaggio mopeds such as Ciao, SI, Bravo and identical models with mono gearbox and 16" cast rims.
Note: During assembly, it is essential to adjust the axial play of the clutch bell, which should be 0.1-0.2 mm, in order to prevent the rivets from sticking to the starter clutch. The liner must be removed before fitting the clutch, the needle bearings inside the clutch must then be filled with grease, otherwise the clutch bearing will run dry and seize up.
Suitable spacers can be found in the accessories section.
Original Piaggio spare part number: 1651505/ 4803595
Made by the Italian brand CIF.
| Manufacturer | CIF |
| Ø Outer pulley | 56 mm |
| Material | Steel |
| Area of application | Standard |
| Number of springs | 3 pcs, 2 pcs |
| Number of jaws | 3 pcs, 2 pcs |
| Ø inside | 82 mm |
| Ø outside | 90 mm |
| Piaggio | Ciao - P , SC , PX , C24 Si Bravo / Super Bravo Boxer Grillo |
Ratings
Accessories & related products
GPO clutch spring set (+40 %) Mono | Piaggio Ciao, SI, Bravo, Boxer
Spring design: Tension spring · Ø wire: 1.3 mm · Manufacturer: GPO · Material: Spring steel · Surface: varnished · Color: red · Ø outside: 7 mm · Total length: 22 mm · Alternative version of the Piaggio OEM number: 121753 · Alternative version of the Piaggio OEM number: 289451
EUR 15.60
Moped fans also bought
Hot 
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11.90
Dell'Orto 13/13 SHA carburetor hand choke | Piaggio Ciao PX / C24, Bravo, SUPERbravo
Nominal diameter: 13 mm · Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: black · Width: 60 mm · Carburetor type: SHA (Piaggio) · Height: 96 mm · Mounting type: Plug connection clamped · Ø Internal connection: 16 mm · Ø without reducing sleeve: 18 mm · Ø Inside entrance: 13 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Total length: 46 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Area of application: Tuning · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 66
EUR 72.20
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
