Socket axle M11x200 made of galvanized steel for your moped, moped and small motorcycle.
The axle can be used for both front wheels (shortened) and rear wheels.
The complete rear axle set is also equipped with the following parts:
- 2 pcs M11 x 1 nuts (SW17 / 10 mm)
- 2 pcs spacer washer (Ø 20 x 2 mm)
- 2 pcs;ck bearing cone (D19 x d13 mm / SW15)
- 3 pcs M11 x 1 nuts (SW17 / 4 mm)
- 2 pcs ball set à 8 balls (Ø 6.32 mm)
Other threaded shafts and individual parts of this set can be found in the accessories section.
Made by the Italian brand CIF.
| Manufacturer | CIF |
| Material | Steel |
| Surface | galvanized (blue) |
| Ø shaft | 10.3 mm |
| Height | 10 mm, 4 mm, 2 mm |
| Ø ball [inch] / [mm] | 1/4" (6.35 mm) |
| Thread type | MF11x1 (fine pitch thread) |
| Total length | 200 mm |
| Shank length | 14.5 mm |
| Thread length | 92 mm |
| Ball bearing closed | No |
| Width across flats | 17 mm, 15 mm |
| Puch |
| Sachs |
Ratings
Accessories & related products
Wheel axle set M12x1 x 165 front
Manufacturer: Quenching · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Ø inside: 12.6 mm · Ø inside: 13.2 mm · Ø shaft: 11.9 mm · Shank length: 114 mm · Ø outside: 17.4 mm · Width across flats: 19 mm · Ø outside: 19.9 mm · Total length: 165 mm · Thread type: MF12x1 (fine pitch thread) · Width: 7 mm · Width: 10.2 mm · Thread length: 25 mm · Thread length: 26 mm · Width: 32 mm · Height: 9.9 mm
EUR 17.70
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.40
EUR 2’640.00/l
66HEROES pointed nut "Bullit" M11x1 wheel nut Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Pointed nut · Thread type: MF11x1 (fine pitch thread) · Drive: External hexagon · Height: 23.5 mm · Thread depth: 16 mm · Width across flats: 17 mm
EUR 14.40
swiing® revival wheel bearing set M11x1
Manufacturer: swiing® revival parts · Material: Steel · Surface: gas nitrided · Thread type: MF11x1 (fine pitch thread) · Diameter: 17.95 mm · Ø outside: 29 mm · Ø inside: 25.85 mm · Height: 10.6 mm · Height: 14.15 mm · Width across flats: 15 mm · Ø ball [inch] / [mm]: 7/32" (5.56 mm)
EUR 53.00
Explore categories from Hub & axle
Moped fans also bought
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Ø bore: 4.05 mm · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø Pin: 4 mm
EUR 22.80
Bearing cone M11x1 mm
Material: Steel · Surface: gas nitrided · Color: graphite colors · Ø outside: 19 mm · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Ø ball [inch] / [mm]: 3/16" (4.78 mm) · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Thread type: MF11x1 (fine pitch thread) · Width across flats: 15 mm · Height: 12 mm
EUR 9.55
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
