D6 Type BQ retaining ring for positioning components on axles that do not have a groove. Clamping rings are ideal for fastening emblems, for example on mopeds, mopeds and small motorcycles.
The sheet metal edge grips into the counterpart due to the spring preload and the crowning and thus protects against displacement.
Note: In many cases, disassembly is not possible without damage. In addition, locking elements should only be used once.
Further details in other sizes can be found in the accessories section.
| Material | Spring steel |
| Surface | blackened |
| Fuse type | Outside |
| Place of use | Universal |
| Ø outside | 16 mm |
| Nominal diameter | 6 mm |
| Ø inside | 5.75 mm |
| Thickness | 0.4 mm |
| Height | 2.3 mm |
Ratings
Accessories & related products
Explore categories from Screws & fastener sets
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Thread type: MF12x1 (fine pitch thread) · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm · Mounting type: Union nut
EUR 11.60
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Material: Brass · Manufacturer: Magura · Material: Steel · Surface: nickel-plated · Ø outside: 5 mm · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm · Number of components: 2 pcs
EUR 2.35
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Material: Brass · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø nipple: 6 mm · Nipple length: 5.5 mm · Area of application: Standard · Ø Stranded wire: 1.2 mm · Cable length: 2000 mm · Nipple shape: Barrel (transverse) · Number of components: 1 pcs
EUR 4.00
Olympia cylinder head for 41 - 43 mm cylinder kit | Piaggio Ciao
Manufacturer: Olympia · Material: Aluminum · Area of application: Racing · Area of application: Tuning · Ø cylinder: 41 - 43 mm · Width: 78 mm · Height: 60 mm · Total length: 120 mm · Number of fixing points: 3 pcs · Candle thread: short
EUR 30.40
Fuel tap horizontal M12x1 (with union nut) bottom outgoing | Piaggio Ciao
Possible lever positions: open / closed / reserve · Material lever: Aluminum · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Reserve level: 70 mm · Thread type: MF12x1 (fine pitch thread) · Alternative version of the Piaggio OEM number: 103089 · Piaggio OEM number: 189525 · Piaggio OEM number: 257073
EUR 11.60
Collection only possible with online purchase and appointment.
