Nice disc brake system for your Puch moped / moped with 5-star cast rim and EBR telescopic fork with mount for a brake caliper.
The disc brake system is factory-filled with brake fluid.
The disc brake system is filled with brake fluid ex works and is supplied ready for installation with all necessary components.
Scope of delivery:
- Brake disc Ø 240 mm
- Hub with ball bearings already installed
- Brake caliper
- 850 mm long steel flex hose
- Brake lever
- Mounting plate for attaching the brake calliper
- 12 mm wheel axle with all nuts and washers
- Bolts for mounting the hub to the rim
Notes: Mounting on the original fork is not possible. An EBR fork with the option of attaching a brake calliper is required (see accessories).
The hub fits in original Grimeca as well as in the reproduction rims in the accessories.
The disc brake kit works, but will not knock anyone off their saddle in terms of quality. You can find the high-quality alternative in the accessories section.
| Manufacturer | Quenching |
| Ø outside | 240 mm |
| Cable length | 850 mm |
| Ø Handlebars | 22 mm |
| Puch |
Ratings
Accessories & related products
Brake line 0.9 - 1.9 m (selection) black 28 / 90° incl. banjo bolts
Material: Rubber · Material: Steel · Color: black · Cable length: 900 mm · Cable length: 1000 mm · Cable length: 1150 mm · Cable length: 1400 mm · Cable length: 1600 mm · Cable length: 1700 mm · Cable length: 1900 mm · Thread type: MF10x1.25 (fine pitch thread) · Mounting type: Screws
EUR 28.80
Moped fans also bought
Return spring brake plate | Puch Maxi
Spring design: Nose feather · Spring design: Torsion spring · Material: Spring steel · Surface: galvanized (blue) · Area of application: Original · Area of application: Standard · Ø inside: 25.5 mm · Ø wire: 2.4 mm · Ø outside: 30 mm · Total length: 125 mm · Leg length: 45 mm · Length spring hook: 50 mm
EUR 5.90
Airsal 45 mm cylinder kit 70 ccm camouflaged | Puch
Manufacturer: Airsal · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 70 ccm · Nominal diameter: 45 mm · Ø cylinder neck: 48 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Inlet window: 23.5 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 25 mm · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 38 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 120.30
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Material: Spring steel · Surface: coated · Manufacturer: swiing® ingenious parts · Total length: 28 mm · Color: blue · Ø wire: 1.7 mm · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Number of components: 3 pcs · Area of application: Tuning
EUR 21.60
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Reserve level: 70 mm
EUR 11.90
GPO sprocket 40 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Color: black · Number of teeth: 40 pcs · Ø inside: 94 mm · Ø bolt circle: 106 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Ø mounting hole: 6.7 mm · Number of fixing points: 6 pcs
EUR 24.00
Collection only possible with online purchase and appointment.
