Special side-pipe exhaust for your Puch Maxi S moped.
The black-painted tuning exhaust comes ready for installation with the required mounting bracket.
The mounting flange is attached to a slotted hole, allowing for ideal positioning.
Note: To install this on your Maxi N, you’ll need to either use an additional clamp or bridge the gap with an extension strut.
Depending on the batch, the paint finish may not be highly resistant to vibrations or environmental factors. We recommend using heat-resistant paint to reinforce the finish.
You can find both items, as well as alternative mufflers, in the accessories section.
A quality product manufactured in Portugal.
| Ø outside | 60 mm |
| Manufacturer | Made in Portugal |
| Material | Steel |
| Surface | varnished |
| Color | black |
| Total length | 860 mm |
| Ø Internal connection | 24.5 mm |
| Ø Flame tube outside | 28 mm |
| Exhaust type | Sidepipe |
| Mounting type | Nuts & bolts |
| Number of fixing points | 3 pcs |
| Flame tube attachment | Stud bolts & nuts |
| Puch | E50 |
Accessories & related products
Exhaust 18 mm replica (with number) | Puch Maxi S, N
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 920 mm · Mounting type: Welded lug · Ø Silencer: 59 mm · Ø Internal connection: 14 mm · Number of fixing points: 4 pcs · Ø Flame tube outside: 18 mm · Exhaust type: Flute · Flame tube attachment: Flange
EUR 69.80
Exhaust 22 mm 2-piece replica (with number) | Puch
Total length: 920 mm · Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Ø outside: 58 mm · Number of fixing points: 4 pcs · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Flame tube attachment: Flange
EUR 78.30
66HEROES Exhaust bracket 50 mm flat Inox
Thickness: 4 mm · Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Surface: electropolished · Total length: 81 mm · Ø mounting hole: 8.3 mm · Ø mounting hole: 20 mm · Number of fixing points: 2 pcs · Hole spacing: 50 mm
EUR 14.40
66HEROES Exhaust bracket 75 mm flat Inox
Total length: 106 mm · Thickness: 4 mm · Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Surface: electropolished · Ø mounting hole: 8.3 mm · Ø mounting hole: 20 mm · Number of fixing points: 2 pcs · Hole spacing: 75 mm
EUR 15.10
66HEROES Exhaust bracket 100 mm flat Inox
Thickness: 4 mm · Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Surface: electropolished · Total length: 130 mm · Ø mounting hole: 8.3 mm · Ø mounting hole: 20 mm · Number of fixing points: 2 pcs · Hole spacing: 100 mm
EUR 15.60
Not in stock
Hot 
swiing® ingenious 28 mm Graphite Exhaust Gasket | Puch, Tomos
Ø inside: 27.4 mm · Thickness: 3 mm · Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Area of application: Tuning · Place of use: Exhaust · Reinforced: No · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm
EUR 8.95
Exhaust set Sidepipe Ø 28 / 60 mm chrome | Puch
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Ø outside: 60 mm · Total length: 600 mm · Color: Chrome · Ø Internal connection: 28 mm · Ø Flame tube outside: 28 mm · Exhaust type: Sidepipe · Mounting type: Screwed clamp · Flame tube attachment: Flange
EUR 186.80
swiing® ingenious resonance exhaust set Ø 28 / 70 mm | Puch Maxi, X30 Sport
Surface: chrome-plated · Manufacturer: swiing® ingenious parts · Material: Steel · Color: Chrome · Total length: 730 mm · Ø Internal connection: 28 mm · Ø outside: 70 mm · Exhaust type: Cigar · Mounting type: Screwed clamp · Flame tube attachment: Flange
EUR 144.60
Exhaust Boss Demper Ø 28 / 60 mm chrome
Ø outside: 60 mm · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 580 mm · Mounting type: Screwed clamp · Ø Silencer: 60 mm · Ø Internal connection: 28 mm · Exhaust type: Dragpipe / sharp end · Flame tube attachment: Plug connection clamped
EUR 120.50
Exhaust sidepipe 28 mm chrome | Puch Maxi S
Ø outside: 60 mm · Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 860 mm · Mounting type: Nuts & bolts · Ø Internal connection: 24.5 mm · Number of fixing points: 3 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Sidepipe · Flame tube attachment: Stud bolts & nuts
EUR 150.60
Explore categories from Exhaust system
Moped fans also bought
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Ø inside: 16.2 mm · Total length: 19 mm · Manufacturer: swiing® revival parts · Ø Bundle: 24.1 mm · Material: Nylon · Color: black · Bearing type: Plain bearing · Ø outside: 20.2 mm · Puch OEM number: 349.1.42.005.1
EUR 3.00
Hot
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Thread length: 35 mm · Thread length: 50 mm · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Total length: 47 mm · Total length: 60 mm · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread)
EUR 15.60
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Total length: 66 mm · Height: 95 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nozzle thread: M3.5x0.6 (standard thread) · Mounting type: Plug connection clamped · Ø fuel hose connection: 6 mm · Width: 50 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m · Alternative version of the Puch OEM number: 349.1.15.100.0 · Alternative version of the Puch OEM number: 349.2.15.800.0 · Alternative version of the Puch OEM number: 349.4.15.500.0 · Alternative version of the Puch OEM number: 349.4.15.000.0 · Alternative version of the Puch OEM number: 349.4.15.300.0 · Alternative version of the Puch OEM number: 349.6.15.400.0 · Alternative version of the Puch OEM number: 349.7.15.700.0 · Alternative version of the Puch OEM number: 349.8.15.400.0 · Alternative version of the Puch OEM number: 349.9.15.300.0
EUR 96.40
Hot
Inner cable set automatic | Puch E50
Total length: 1600 mm · Total length: 2200 mm · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 11.90
GPO side bars black matt (1A quality) | Puch Maxi S
Ø outside: 12.5 mm · Width: 170 mm · Manufacturer: GPO · Material: Steel · Surface: varnished · Color: black · Total length: 420 mm · Mounting type: Screws · Height: 35 mm · Ø mounting hole: 8.1 mm · Number of fixing points: 4 pcs · Hole spacing: 410 mm
EUR 36.10
Handlebar fork plate 30 cm curved black
Ø outside: 22 mm · Width: 610 mm · Manufacturer: Made in Portugal · Material: Steel · Surface: varnished · Color: black · Fork plate holder length: 75 mm · Mounting type: Fork plate · Clamping diameter: 22 mm · Height: 300 mm · Length handlebar ends: 145 mm · Crossbar: No
EUR 46.90
GPO mudguard strut front 17" black
Manufacturer: GPO · Material: Steel · Surface: varnished · Color: black · Ø mounting hole: 7 mm · Ø mounting hole: 12.5 mm · Total length: 305 mm · Distance mudguard - center hole: 300 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs · Wheel size: 17 "
EUR 18.00
Working late? Evening hours on Thursday until 20:00
