Side exhaust tailpipe with a diameter of 65 mm suitable for various exhaust pipes on mopeds, mopeds or small motorcycles.
The tailpipe is perfectly modeled on the original. The end piece is flattened at the side.
This protects the rims and tires from dirt, as the exhaust gas flows off to the side, and also gives the muffler a nostalgic touch.
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Total length | 155 mm |
| Ø External connection | 62.5 mm |
| Ø outside | 65 mm |
| Universal |
| Puch |
| Sachs |
| Hercules |
Ratings
Accessories & related products
Moped fans also bought
Oil seal NBR 17/33/7 B DUO crankshaft | Sachs 503 AB, ADV
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: B DUO - With sheet metal outer casing / two sealing lips. · Manufacturer: Sachs · Material: NBR · Ø outside: 33 mm · Ø inside: 17 mm · Place of use: Crankshaft · Width: 7 mm
EUR 10.80
NSK 6201 ball bearing 12/32/10
Bearing cage: Sheet steel cage ball-guided · Inner ring width: 10 mm · Manufacturer: NSK · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Material: Steel · Surface: blank · Area of application: Standard · Stock number: 6201 · Bearing type: Shoulder bearing · Ø inside: 12 mm · Ø outside: 32 mm · Width: 10 mm · Ball bearing closed: No
EUR 10.30
Shaft seal NBR 14.96x31.5x3.5 Pinion shaft | Sachs 502, 50/2, 503 (A1134)
Temperature resistance (min.): -30 - 100 °C · Manufacturer: Sachs · Material: NBR · Place of use: Pinion shaft · Surface: coated · Area of application: Standard · Ø inside: 14.96 mm · Ø outside: 31.5 mm · Width: 3.5 mm · Pony OEM number: A1134 · Sachs OEM no.: 0230 011 100 · Sachs OEM no.: 0230 011 200
EUR 9.10
Oil seal NBR 15/30/7 B DUO | Sachs 50/2 / 503 (A1830)
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: B DUO - With sheet metal outer casing / two sealing lips. · Manufacturer: Sachs · Material: NBR · Ø inside: 15 mm · Ø outside: 30 mm · Width: 7 mm · Pony OEM number: A1830 · Sachs OEM no.: 0250 090 000
EUR 6.55
swiing® revival 80° carburetor pipe bend M6x0.75
Manufacturer: BING · Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Total length: 41.5 mm · Total length: 50 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 80 ° · Height: 35 mm
EUR 8.40
Handlebar stem 22 mm front black (4-point adjustment for fork plate handlebars)
Clamping diameter: 22 mm · Color: black · Total length: 170 mm · Width: 50 mm · Material: Aluminum · Material: Steel · Surface: powder-coated · Drive: External hexagon · Ø Stem: 22 mm · Number of fixing points: 4 pcs
EUR 36.30
Collection only possible with online purchase and appointment.
