High-quality replica tie rod for Zündungen with small Bosch flywheel, which were installed on Zündapp ZD 10, ZD 30, ZR 10, ZR 20, ZR 30, ZA 25 and ZA 40 mopeds, among others.
Hole spacing (center - center): 46.5 mm
Hole diameter: 4.6 mm
For flywheels with an inner diameter of 80 mm
Original Zündapp spare part number: 249-07.908
Original BOSCH spare part number: 2 204 211 052
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Ø Internal flywheel | 80 mm |
| Ø cable holder | 6.1 mm |
| Color | black |
| Area of application | Standard, Original |
| Place of use | Internal (in the ignition) |
| Cable length | 68 mm |
| Total length | 69.7 mm |
| Ø mounting hole | 4.6 mm |
| Height | 11 mm |
| Hole spacing | 46.5 mm |
| Mounting type | Screws |
| Number of fixing points | 2 pcs |
| Zündapp |
Ratings
Moped fans also bought
Hot 
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.60
BERU breaker with cable | Bosch / Ducati
Manufacturer: BERU · Material: Steel · Ø Internal flywheel: 90 mm · Cable length: 100 mm · Cable available: Yes · Ø axle: 4 mm · Number of fixing points: 1 pcs · Ø mounting hole: 4.5 mm · Area of application: Original · Area of application: Standard · Alternative version of the Pony OEM number: A4606 · BOSCH OEM number: 1 217 013 025 · Alternative version of the Sachs OEM number: 0983 106 000 · BERU OEM number: 0 340 100 710
EUR 18.00
EFFE screw-in condenser | Bosch / Minarelli
Manufacturer: EFFE · Capacity: 0.22 µF · Area of application: Original · Area of application: Standard · Ø outside: 18 mm · Thread type: M3x0.5 (standard thread) · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Height: 25 mm · Total height: 28 mm · BOSCH OEM number: 2 207 330 041 · BOSCH OEM number: 2 207 330 050 · Minarelli OEM number: 8201306
EUR 15.10
BERU breaker with cable (small) | Bosch / Ducati / Minarelli
Manufacturer: BERU · Ø mounting hole: 4.5 mm · Material: Steel · Ø Internal flywheel: 80 mm · Cable available: Yes · Number of fixing points: 1 pcs · Ø axle: 4 mm · Area of application: Original · Area of application: Standard · Pony OEM number: A2496 · Morini OEM number: 29 0026 005 · Morini OEM number: 29 0034 005 · BERU OEM number: 0 340 100 458 · BOSCH OEM number: 2 207 013 005 · BOSCH OEM number: 2 207 110 007 · Minarelli OEM number: 82 000 16 · Fantic OEM number: 320 4500 5150
EUR 22.80
Hot
swiing® revival screw-in condenser | Bosch / Ducati
Manufacturer: swiing® revival parts · Capacity: 0.16 µF · Area of application: Original · Area of application: Standard · Ø outside: 18 mm · Thread type: M3x0.5 (standard thread) · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Height: 23 mm · Total height: 32 mm · BOSCH OEM number: 2 207 330 050
EUR 11.90
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: SRE · Choke control: Hand choke · Total length: 66 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Width: 50 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Height: 95 mm · Mixed oil connection: No · Vacuum connection: No · Mounting type: Plug connection clamped · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 96.20
DUCATI screw-in condenser | Bosch / Ducati
Manufacturer: DUCATI · Capacity: 0.2 µF · Area of application: Original · Area of application: Standard · Ø outside: 18 mm · Thread type: M3x0.5 (standard thread) · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Height: 23.5 mm · Total height: 30.5 mm · Alternative version of the Pony OEM number: A2090 · Alternative version of the Pony OEM number: A2092 · Alternative version of the Pony OEM number: A5520 · Alternative version of the Sachs OEM number: 0265 052 003 · Alternative version of the Sachs OEM number: 0265 052 007 · Alternative version of the Sachs OEM number: 0265 202 000
EUR 24.00
Not in stock
Collection only possible with online purchase and appointment.
