Black, adjustable dampers with fancy red coil springs for your moped, moped and small motorcycle.
The hardness or preload of the dampers can be adjusted using the special spring mount.
Length (mount - mount): 300 mm
Outer diameter of coil spring: 50 mm
Holt diameter: 30 mm
Bush diameter to mount: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
| Manufacturer | GPO |
| Hole spacing | 300 mm |
| Surface | varnished |
| Color | red, black |
| Damping type | Spring |
| Adjustable | Yes |
| Ø spars | 30 mm |
| Mounting type | Nuts & bolts |
| Ø Fastening inside | 10 mm |
| Ø outside | 50 mm |
| Total length | 330 mm |
| Number of fixing points | 2 pcs |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.40
EUR 2’640.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Manufacturer: YSS · Hole spacing: 330 mm · Material: Steel · Surface: varnished · Damping type: Hydraulic (oil) · Color: black · Adjustable: Yes · Ø spars: 32 mm · Mounting type: Nuts & bolts · Ø Fastening inside: 10 mm · Ø outside: 52 mm · Total length: 335 mm · Number of fixing points: 2 pcs
EUR 156.70
swiing® revival screw set shock absorber mounting with axle galvanized | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Thread type: M8x1.25 (standard thread) · Number of components: 17 pcs
EUR 14.40
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Thread type: M8x1.25 (standard thread) · Number of components: 17 pcs
EUR 21.60
MKX shock absorber 30 cm chrome
Manufacturer: MKX · Hole spacing: 300 mm · Material: Aluminum · Material: Steel · Surface: chrome-plated · Color: Chrome · Damping type: Spring · Adjustable: Yes · Ø spars: 24 mm · Mounting type: Nuts & bolts · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø outside: 46 mm · Total length: 335 mm · Number of fixing points: 2 pcs
EUR 60.20
Explore categories from Shock absorber & swingarm
Moped fans also bought
Inox
Hot 
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Hole spacing: 30 mm · Hole spacing: 50 mm · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Width: 105 mm · Height: 5.3 mm · Mounting type: Nuts & bolts · Thread type: M5x0.8 (standard thread) · Ø mounting hole: 5 mm · Total length: 145 mm · Number of fixing points: 2 pcs · Thread length: 8 mm
EUR 13.10
Working late? Evening hours on Thursday until 20:00
