Special CDI ignition box suitable for all HPI ignitions on your moped, moped and small motorcycle.
The ignition box has two additional cables with different ignition curves for the corresponding speed range.
The desired ignition curve is activated by connecting the corresponding cable. The two curves are not used for speed throttling, but are designed for different loads in the racing area.
To simplify matters, a switch can be connected. This makes it easy to switch between the two ignition curves at the touch of a button.
You can find the toggle switch, a corresponding ignition and suitable connectors in the accessories section.
Branded product from the manufacturer HPI – Horse Power Ignition.
| Manufacturer | HPI |
| Material | Plastic |
| Color | black |
| Number of fixing points | 1 pcs |
| Ø mounting hole | 6 mm |
| Area of application | Performance, Racing, High End, Tuning |
| Universal |
| Puch |
| Sachs |
| Pony / Cilo (Beta 521 & 512) |
| Piaggio |
| Zündapp Belmondo |
Ratings
Accessories & related products
HPI racing ignition set 12V with light 60W | Puch X30 Velux / Sachs 503 / Zündapp Belmondo
Ø cable: 7 mm · Manufacturer: HPI · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Tension: 12 V · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Performance: 60 W
EUR 439.40
Hot 
HPI ignition box programmable (two ignition curves)
Ø mounting hole: 7.5 mm · Manufacturer: HPI · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Material: Plastic · Color: red · Width: 100 mm · Height: 28 mm · Total length: 63 mm · Number of fixing points: 2 pcs · Hole spacing: 80 mm
EUR 357.30
Moped fans also bought
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 38 mm · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Number of fixing points: 4 pcs · Area of application: Standard · Candle thread: short · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 38.60
Airsal 38 mm cylinder kit 50 cc camouflaged | Puch Maxi, X30
Manufacturer: Airsal · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 50 ccm · Nominal diameter: 38 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 20 mm · Number of fixing points: 4 pcs · Area of application: Tuning · Ø piston pin (B): 12 mm · Inlet window: 23.5 / 20 x 14.5 · Thread inlet: M6x1 (standard thread) · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Hole spacing inlet: 38 mm
EUR 117.10
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Manufacturer: Airsal · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 65 ccm · Nominal diameter: 44 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Number of fixing points: 4 pcs · Area of application: Tuning · Ø piston pin (B): 12 mm · Inlet window: 24 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Hole spacing inlet: 38 mm
EUR 105.40
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Ø cylinder: 45 mm · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Number of fixing points: 4 pcs · Area of application: Tuning · Candle thread: short · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 38.60
swiing® revival nut M11x1 x 4 SW19 wheel nut galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon flat nut · Drive: External hexagon · Strength class: 8 · Thread type: MF11x1 (fine pitch thread) · Height: 4 mm · Width across flats: 19 mm
EUR 3.40
GPO 44 mm cylinder head | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Ø cylinder: 44 mm · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Number of fixing points: 4 pcs · Area of application: Tuning · Candle thread: short · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 50.30
swiing® ingenious intake manifold Gilardoni italkit Inox
Ø inside: 21 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Total length: 80 mm · Mounting type: Screws · Total height: 55 mm · Height flange center hole: 42.5 mm · Ø External connection: 24 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 35 · Camouflaged: No · Area of application: Tuning
EUR 79.60
Collection only possible with online purchase and appointment.
