Screw set for securing the HRT clutch linings to the clutch hub, compatible with the corresponding HRT SX50 KTM clutch on your Puch Maxi moped with an E50 engine.
The M6x25 mm screws have a high strength rating of 10.9.
The set includes three mounting screws.
Note: The tightening torque for the M6 lining screws is 10 Nm.
You can find all other individual parts, as well as the complete clutch, in the accessories section.
A quality product from the Swiss manufacturer HR-TECHNIK.
| Manufacturer | HR-Technik |
| Material | Steel |
| Surface | blackened |
| Number of components | 3 pcs |
| Drive | External hexagon |
| Screw head | Hexagon |
| Nominal diameter (thread) | 6 mm |
| Thread type | M6x1 (standard thread) |
| Width across flats | 10 mm |
| Thread length | 25 mm |
| Puch | E50 |
Accessories & related products
HRT disk spring set 0.8 mm clutch KTM SX50 Inox | Puch E50
Ø inside: 8.2 mm · Ø outside: 15 mm · Thickness: 0.8 mm · Manufacturer: HR-Technik · Area of application: High End · Area of application: Racing · Material: Chrome steel (colloquially known as stainless steel) · Number of springs: 48 pcs
EUR 60.20
Explore categories from Clutch
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Rolling circumference: 1626 mm · Number of chain links: 128 pcs · Chain lock type: Spring lock · Color: gray · Ø Pin: 3.94 mm · Ø bore: 4 mm
EUR 15.10
swiing® ingenious crankshaft "High End" C3/4 & FPM (+1 mm stroke) | Puch E50
Manufacturer: swiing® ingenious parts · Material: Steel · Cheek type: Full cheeks · Crankshaft stroke: 44 mm · Weight: 970 g · Thread type: MF10x1 (fine pitch thread) · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø piston pin (B): 12 mm · Area of application: High End · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread length: 11 mm · Thread length: 15 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Number of gears: 1 pcs
EUR 277.30
HRT disk spring set 0.8 mm clutch KTM SX50 Inox | Puch E50
Ø inside: 8.2 mm · Ø outside: 15 mm · Thickness: 0.8 mm · Manufacturer: HR-Technik · Area of application: High End · Area of application: Racing · Material: Chrome steel (colloquially known as stainless steel) · Number of springs: 48 pcs
EUR 60.20
Working late? Evening hours on Thursday until 20:00
