High-quality full cheek crankshaft for Morini M0, M01 and M1 engines which is installed on Alpa Turbo / Chopper and Malaguti Fifty mopeds, among others.
The connecting rod is highly polished. In addition, the rear connecting rod bearing is a silver bearing, which has excellent emergency running properties. The balancing bores of the racing crankshaft are sealed with aluminum inserts for greater pre-compression.
Note: The crankshaft does not fit FMT1 CH engines.
Corresponding bearings, oil seals, racing cylinders etc. can be found in the accessories section.
Branded product from the Portuguese manufacturer Jasil under the Top Racing brand.
| Manufacturer | Jasil |
| Area of application | Racing |
| Cheek type | Full cheeks |
| Crankshaft stroke | 39 mm |
| Total length of crankpin on clutch side | 71 mm |
| Total length crankpin ignition side | 67.25 mm |
| Ø piston pin (B) | 12 mm |
| Ø Bearing seat (clutch side) | 17 mm |
| Ø Bearing seat (ignition side) | 17 mm |
| Alpa Chopper / Turbo | |
| Malaguti |
Accessories & related products
Airsal 43.5 mm cylinder kit 12 mm KoBo | Morini
Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Area of application: Tuning · Nominal diameter: 43.5 mm · Ø cylinder neck: 47.9 mm · Ø outlet inside: 23.2 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Hole spacing outlet: 35 mm · Outlet type: straight · Hole pattern [mm]: 46 x 46 · Thread outlet: M5x0.8 (standard thread) · Decompressor: No · Camouflaged: No
EUR 120.00
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Area of application: Standard · Material: Brass · Material: Steel · Thread type: M6x1 (standard thread) · Surface: galvanized (blue) · Surface: nickel-plated · Total length: 15 mm · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Ø Bundle: 6 mm · Screw head: Hexagon · Thread length: 7 mm · Ø outside: 8 mm · Width across flats SW: 7 mm
EUR 3.00
Magura adjusting screw brake long
Manufacturer: Magura · Material: Brass · Thread type: MF6x0.75 (fine pitch thread) · Color: silver · Surface: nickel-plated · Ø shaft: 6 mm · Total length: 47 mm · Total length: 65 mm · Drive: Knurled screw · Ø External head: 9.1 mm · Thread length: 24 mm · Shank length: 11 mm
EUR 4.70
NTN 6203 C3 Ball bearing 17/40/12
Bearing cage: "-" Sheet steel cage ball-guided · Inner ring width: 12 mm · Manufacturer: NTN · Bearing clearance: C3 · Groove ring: No · Material: Steel · Surface: blank · Stock number: 6203 · Bearing type: Deep groove ball bearing · Width: 12 mm · Ø outside: 40 mm · Ø inside: 17 mm · Area of application: Standard · Ball bearing closed: No
EUR 10.70
Oil level screw engine | Zündapp Bergsteiger / Alpa Chopper / Malaguti Fifty
Manufacturer: ALPA · Material: Steel · Thread type: M6x1 (standard thread) · Drive: Slot · Color: silver · Screw head: Cylinder head · Surface: galvanized (blue) · Number of components: 1 pcs · Thread length: 16 mm · Area of application: Standard
EUR 2.90
Collection only possible with online purchase and appointment.
