Revised 2021 version of one of the best cylinder kits available for Piaggio Si, Bravo 2 and 3 and Grillo mopeds / mopeds.
This is the version with 10 mm piston pin and the older version of the cylinder head.
This cast iron cylinder offers a very good increase in performance over the entire rev range and makes it one of the most popular 63 cc racing cylinders for Piaggio.
The workmanship is very clean and the matching of the piston windows to the overflow channels and boost parts is also very good. The webs in the area of the cylinder head significantly reduce the risk of piston jamming and make the cylinder extremely durable.
The cylinder head with its original look ensures good compression with its combustion chamber shape matched to the cylinder and piston.
With the reworking, the triangular shape of the cylinder head was adapted to a longitudinal shape. As a result, the cylinder fits much better on racing gear such as the Polini Speed Engine, but less well on the original gear. Fortunately, there is enough sealing surface available so that you can bring the channels back into a triangular shape on the cylinder if necessary.
The set includes the following fixed parts:
Hole pattern [mm]: 55 x 34 · Manufacturer: Malossi · Material: Gray cast iron · Surface: sandblasted · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 43 mm · Ø cylinder neck: 45.6 mm · Ø Outlet outside: 22.5 mm · Ø outlet inside: 18.3 mm · Ø piston pin (B): 10 mm · Outlet type: clamped · Number of fixing points: 3 pcs · Decompressor: Yes · Camouflaged: No · Area of application: Tuning
Hole pattern [mm]: 35 x 55 · Manufacturer: Malossi · Material: Aluminum · Ø cylinder: 41 - 43 mm · Camouflaged: No · Number of fixing points: 3 pcs · Candle thread: short · Decompressor: Yes · Total length: 134 mm · Width: 94 mm · Height: 52 mm · Area of application: Racing
Details
| Manufacturer | Malossi |
| Material | Gray cast iron |
| Surface | sandblasted |
| Displacement | 63 ccm |
| Area of application | Tuning |
| Nominal diameter | 43 mm |
| Crankshaft stroke | 43 mm |
| Number of fixing points | 3 pcs |
| Ø piston pin (B) | 10 mm |
| Outlet type | clamped |
| Decompressor | Yes |
| Camouflaged | No |
Suitable for the following models
| Piaggio | Si Bravo / Super Bravo Grillo |
Accessories & related products
SITO Plus exhaust Ø 24 mm | Piaggio SI, Grillo
Manufacturer: SITO · Material: Steel · Color: black · Surface: varnished · Ø Silencer: 70 mm · Number of fixing points: 1 pcs · Ø Internal connection: 22.3 mm · Ø outside: 14 mm · Ø Flame tube outside: 25 mm · Exhaust type: Cylindrical · Total length: 720 mm · Mounting type: Welded lug · Flame tube attachment: Plug connection clamped
EUR 96.20
Jasil crankshaft "Racing" 10 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Jasil · Material: Steel · Cheek type: standard · Area of application: Racing · Thread type: M8x1.25 (standard thread) · Ø coupling pin / vario pin: 12 mm · Crankshaft stroke: 43 mm · Connecting rod length center-center: 87 mm · Number of gears: 1 pcs · Total length crankpin ignition side: 91.5 mm · Total length crankpin ignition side: 105 mm · Ø crank webs: 69.8 mm · Ø Connecting rod eye: 13 mm · Bearing seat right: 15 mm · Ø piston pin (B): 10 mm · Weight: 716 g · Ø Bearing seat (ignition side): 15 mm · Thread length: 13.5 mm · Dimension needle bearing: 10 / 13 x 14.2 mm (axe 10) · Wide crank webs: 32.9 mm · Length 1st paragraph: 21.5 mm · Length 2nd paragraph: 44 mm · Length 3rd paragraph: 64.9 mm · Ø 1st step (on the coupling side): 15 mm · Ø 2nd shoulder (on the clutch side): 14.4 mm · Ø 3rd step (on the clutch side): 12 mm
EUR 156.30
Polini Speed Engine engine case breaker ignition | Piaggio Ciao, SI, Bravo, Boxer
Width: 175 mm · Manufacturer: Polini · Material: Aluminum · Surface: sandblasted · Color: silver · Stock number: 6202 · Crankshaft stroke: 43 mm · Ignition type: Breaker · Height: 104 mm · Total length: 215 mm
EUR 252.60
Malossi cylinder head for 41 - 43 mm cylinder kit | Piaggio SI, Bravo
Width: 94 mm · Manufacturer: Malossi · Material: Aluminum · Area of application: Racing · Ø cylinder: 41 - 43 mm · Number of fixing points: 3 pcs · Candle thread: short · Height: 52 mm · Total length: 134 mm · Hole pattern [mm]: 35 x 55 · Decompressor: Yes · Camouflaged: No
EUR 84.10
Malossi tuning set 43 mm | Piaggio SI, Bravo, Grillo
Manufacturer: Dell'Orto · Manufacturer: Malossi · Manufacturer: NGK · Manufacturer: SITO · Manufacturer: swiing · Camouflaged: No · Area of application: Tuning · Crankshaft stroke: 43 mm · Displacement: 65 ccm · Nominal diameter: 44 mm · Ø piston pin (B): 10 mm · Ø piston pin (B): 12 mm · Decompressor: Yes · Outlet type: clamped
EUR 451.20
Dell'Orto 13/13 SHA carburetor & racing air filter set | Piaggio SI, Boss, Grillo
Nominal diameter: 13 mm · Manufacturer: Dell'Orto · Manufacturer: Malossi · Component group Carburetor: Carburetor complete · Area of application: Tuning · Choke control: Hand choke · Carburetor type: SHA (Piaggio) · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Ø without reducing sleeve: 18 mm · Nozzle size: 66 · Ø Inside entrance: 13 mm · Ø Internal connection: 16 mm · Ø Output inside: 13 mm · Width: 60 mm · Ø Air filter connection: 50.8 mm · Height: 118 mm · Ø fuel hose connection: 6 mm · Total length: 55 mm
EUR 90.10
swiing® ingenious stud bolt M7x120 / Ø 7.3 shank - 10.9 strength
Manufacturer: swiing® ingenious parts · Material: Steel · Diameter: 7.3 mm · Thread type: M7x1 (standard thread) · Surface: galvanized (blue) · Thread length: 20 mm · Thread length: 30 mm · Strength class: 10.9 · Total length: 120 mm
EUR 5.90
Moped fans like you also bought:
GPO license plate holder Inox
Width: 105 mm · Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Color: silver · Thread type: M5x0.8 (standard thread) · Total length: 145 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Height: 5.3 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Mounting type: Nuts & bolts · Thread length: 8 mm
EUR 13.10
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Number of components: 1 pcs · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
EUR 3.35
Malossi air filter | Piaggio Ciao, SI, Bravo, Boxer
Width: 95 mm · Manufacturer: Malossi · Material: Plastic · Color: black · Area of application: Tuning · Filter type: Foam · Ø Internal connection: 51 mm · Ø outside: 53.2 mm · Height: 88.7 mm · Total length: 31.2 mm · Mounting type: Plug connection clamped · Camouflaged: No
EUR 24.00
SITO Plus exhaust Ø 24 mm | Piaggio SI, Grillo
Manufacturer: SITO · Material: Steel · Color: black · Surface: varnished · Ø Silencer: 70 mm · Number of fixing points: 1 pcs · Ø Internal connection: 22.3 mm · Ø outside: 14 mm · Ø Flame tube outside: 25 mm · Exhaust type: Cylindrical · Total length: 720 mm · Mounting type: Welded lug · Flame tube attachment: Plug connection clamped
EUR 96.20
Malossi 43 mm cylinder kit 10 mm KoBo new version | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Malossi · Material: Gray cast iron · Surface: sandblasted · Area of application: Tuning · Displacement: 63 ccm · Nominal diameter: 43 mm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.6 mm · Ø Outlet outside: 22.5 mm · Ø outlet inside: 18.3 mm · Number of fixing points: 3 pcs · Ø piston pin (B): 10 mm · Outlet type: clamped · Hole pattern [mm]: 55 x 34 · Decompressor: Yes · Camouflaged: No
EUR 174.40
Malossi cylinder head for 41 - 43 mm cylinder kit | Piaggio SI, Bravo
Width: 94 mm · Manufacturer: Malossi · Material: Aluminum · Area of application: Racing · Ø cylinder: 41 - 43 mm · Number of fixing points: 3 pcs · Candle thread: short · Height: 52 mm · Total length: 134 mm · Hole pattern [mm]: 35 x 55 · Decompressor: Yes · Camouflaged: No
EUR 84.10
Dell'Orto 13/13 SHA carburetor | Piaggio SI, Boss, Grillo
Nominal diameter: 13 mm · Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Component group Carburetor: Carburetor complete · Color: black · Total length: 55 mm · Carburetor type: SHA (Piaggio) · Width: 60 mm · Height: 118 mm · Nozzle thread: M5x0.8 (standard thread) · Ø without reducing sleeve: 18 mm · Nozzle size: 66 · Ø Inside entrance: 13 mm · Ø Internal connection: 16 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke
EUR 84.10
Collection only possible with online purchase and appointment.
