«X Special Belt» drive belt with 30° angle for your Piaggio Ciao moped / moped with Vario drive and installed over-range kit from Malossi.
This drive belt is used as standard in conjunction with the 107 mm converter pulleys.
Note: Due to its dimensions, this timing belt is not suitable for use with standard variomatic drives with 13 mm wide belts.
For Piaggio Ciao models, the frame must be adapted so that the overrange kit can be installed.
Alternative belts, the complete overrange kit and other add-on parts can be found in the accessories section.
Quality product from the Italian manufacturer Malossi.
| Manufacturer | Malossi |
| Outer width | 15.5 mm |
| Gearbox type | Vario |
| Rolling circumference | 970 mm |
| Height | 8.5 mm |
| Belt profile | toothed / serrated |
| Piaggio | Ciao - P, SC, PX, C24 |
Ratings
Accessories & related products
Moped fans also bought
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Number of components: 1 pcs · Strength class: 8.8 · Area of application: (Dis)assembly tool
EUR 12.00
M10 sealing ring Fiber
Material: Fiber · Surface: raw · Place of use: Carburetor · Place of use: Motor housing · Ø inside: 10 mm · Thickness: 1.6 mm · Ø outside: 13.8 mm · Area of application: Standard · Pony OEM number: A1817 · Pony OEM number: A5650 · Puch OEM number: 27071 · Sachs OEM no.: 0250 042 001 · Sachs OEM no.: 0650 131 000
EUR 1.95
DUCATI ignition coil (1A quality)
Ø mounting hole: 4.6 mm · Color: black · Manufacturer: DUCATI · Total length: 76.5 mm · Height: 17 mm · Place of use: Internal (in the ignition) · Ø Internal flywheel: 90 mm · Area of application: Original · Area of application: Standard · Ø cable holder: 5.9 mm · Cable length: 37 mm · Number of fixing points: 2 pcs · Hole spacing: 54 mm · Mounting type: Screws · Pony OEM number: A2114 · Alternative version of the Pony OEM number: A2116 · Alternative version of the Pony OEM number: A2118 · Pony OEM number: A5524 · Alternative version of the Sachs OEM number: 0265 142 002 · Alternative version of the Sachs OEM number: 0265 142 004 · Sachs OEM no.: 0265 132 100 · Sachs OEM no.: 0265 203 001
EUR 78.80
Not in stock
swiing® ingenious 19 mm PHBG intake manifold Speed Engine | Piaggio Ciao, SI, Bravo
Manufacturer: swiing® ingenious parts · Ø inside: 19 mm · Material: Aluminum · Surface: anodized · Area of application: Tuning · Color: graphite colors · Ø External connection: 24 mm · Hole spacing inlet: 36 mm · Number of fixing points: 2 pcs · Mounting type: Screws
EUR 36.30
GPO 19.5 mm PHBG AS carburetor hand choke (Dell'Orto replica)
Nominal diameter: 19.5 mm · Manufacturer: GPO · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Area of application: Tuning · Color: black · Carburetor type: PHBG AS · Mounting type: Plug connection clamped · Choke control: Hand choke · Total length: 71.5 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 26 mm · Nozzle size: 85 · Height: 123 mm · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø Internal connection: 24 mm · Width: 71 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke nozzle size: 55 · Nozzle block: 262AU · Size of secondary nozzle: 50
EUR 97.00
Collection only possible with online purchase and appointment.
