Puch brake

swiing® ingenious brake shoes Ø 80 x 18 High End (Grimeca) | Puch Supermaxi

Manufacturer: swiing® ingenious parts · Ø drum: 80 mm · Width: 18 mm · Number of springs: 1 pcs · Springs included: No · Color: red · Area of application: High End

swiing® revival wheel axle M11x1 x 180 | Puch

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 10.95 mm · Shank length: 30 mm · Thread type: MF11x1 (fine pitch thread) · Thread length: 75 mm · Total length: 180 mm

GPO brake shoes Ø 90 x 18 Grimeca Snowflake slotted | Hercules Prima, Puch

Slotted: Yes · Manufacturer: GPO · Color: silver · Springs included: Yes · Ø locating bolt: 10 mm · Number of springs: 1 pcs · Ø drum: 90 mm · Width: 18 mm · Area of application: Tuning · Hercules OEM number: 0873 207 010

GPO brake shoes Ø 80 x 18 slotted | Puch Maxi

Slotted: Yes · Manufacturer: GPO · Springs included: Yes · Number of springs: 2 pcs · Ø drum: 80 mm · Width: 18 mm · Area of application: Tuning

NewFren brake shoes Ø 95 x 22

Manufacturer: NewFren · Springs included: Yes · Width: 22 mm · Number of springs: 2 pcs · Ø drum: 95 mm

Rear brake anchor plate | Puch VZ

Material: Aluminum · Ø axle: 12 mm

Rear brake lever | Puch VS, MV

Ø bore: 10.1 mm · Total length: 91 mm · Brake lever length (lever length): 56 mm

Brake shoes Ø 130 x 30

Springs included: No · Width: 30 mm · Number of springs: 1 pcs · Ø drum: 130 mm

Rear brake anchor plate | Puch MV, MS, VS

Material: Aluminum · Ø axle: 12 mm

Front brake anchor plate | Puch MV, MS, VS, DS

Material: Aluminum

Torsion spring brake plate front & rear Puch DS50, VZ50, VS50, MV50

Spring design: Torsion spring · Material: Spring steel · Surface: galvanized (blue)

Brake plate Grimeca 90 mm | Peugeot 103 SP, MVL (Puch)

Ø bore: 12.2 mm · Ø outside: 110 mm · Material: Aluminum · Surface: sandblasted · Ø External brake pads: 90 mm · Ø axle: 12 mm

Rear brake lever | Puch Monza

Ø bore: 8.2 mm · Material: Steel · Surface: galvanized (blue) · Total length: 66 mm · Brake lever length (lever length): 47 mm

Rear brake lever | Puch VZ, DS

Ø bore: 10.1 mm · Material: Steel · Surface: galvanized (blue) · Total length: 76 mm · Brake lever length (lever length): 56 mm

Rubber brake pedal (1A quality) | Puch RL, SR, M50, M125

Total length: 45 mm · Manufacturer: Made in Italy · Material: Rubber · Surface: ribbed · Color: black · Height: 55 mm · Place of use: Brake

66HEROES cap nut M10.5x1 Backpedal Inox gold

Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Surface: gold-plated · Nut type: Cap nut · Thread type: MF10.5x1 (fine pitch thread) · Drive: External hexagon · Height: 26.2 mm · Width across flats: 17 mm · Thread depth: 23.4 mm

Dust ring Ø 24 / 15.5 mm (without felt) nickel-plated

Material: Steel · Surface: nickel-plated · Ø outside: 24 mm · Ø inside: 15.5 mm · Height: 5 mm

Dust ring Ø 24.3 / 16 mm (without felt) nickel-plated

Material: Steel · Surface: nickel-plated · Ø outside: 24.3 mm · Ø inside: 16 mm · Height: 4.3 mm

swiing® revival bearing shell back pedal cast hub counterpart | Puch Maxi

Manufacturer: swiing® revival parts · Material: Steel · Surface: gas nitrided · Ø outside: 43 mm · Ø inside: 24.5 mm · Ø inside: 38 mm · Height: 24 mm

Brake pads 61.5/28/7.3 Disc brake EBR Harry & hydraulic

Total length: 61.5 mm · Manufacturer: NewFren · Material: Composite materials · Material: Steel · Quantity: 2 pcs · Width: 28 mm · Thickness: 7.3 mm

Coaster hub HR 90V with sprocket 32 t. (with water damage) NOS | Puch X30 Velux Automat

Manufacturer: Sachs · Area of application: Original · Thread type: MF10.5x1 (fine pitch thread) · Color: silver · Ø axle: 10.5 mm · Ø drum: 90 mm · Number of spoke holes: 36 pcs · Puch OEM number: 320.5.41.002.0

Dust ring Ø 25 / 16 mm (without felt) nickel-plated

Material: Steel · Surface: nickel-plated · Ø outside: 25 mm · Ø inside: 16 mm · Height: 4.5 mm

Dust ring Ø 27 / 16.5 mm (without felt) nickel-plated

Material: Steel · Surface: nickel-plated · Ø outside: 27 mm · Ø inside: 16.5 mm · Height: 5 mm

swiing® revival brake cam front wheel | Puch Maxi S, N

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Height: 38.2 mm

ESJOT sprocket backpedal 50 teeth black | Puch / Sachs / Zündapp

Chain type: 415H · Ø inside: 94 mm · Manufacturer: ESJOT · Material: Steel · Surface: varnished · Number of teeth: 50 pcs · Chain pitch: 1/2" x 3/16" · Color: black · Thickness: 4.4 mm · Ø mounting hole: 6.4 mm · Ø bolt circle: 105.5 mm · Number of fixing points: 4 pcs

DMP sprocket 45 teeth galvanized | Puch Maxi, X30 NG-2AH

Chain type: 415H · Ø inside: 94 mm · Manufacturer: DMP · Material: Steel · Surface: galvanized (blue) · Number of teeth: 45 pcs · Chain pitch: 1/2" x 3/16" · Color: silver · Thickness: 4.5 mm · Ø mounting hole: 7 mm · Hole spacing 2: 68.5 mm · Cranking (offset): 6.5 mm · Hole spacing: 37 mm · Ø bolt circle: 106 mm · Number of fixing points: 6 pcs

GALFER brake shoes Ø 80 x 18

Slotted: No · Manufacturer: GALFER · Springs included: Yes · Width: 18 mm · Number of springs: 2 pcs · Ø drum: 80 mm

swiing® ingenious brake shoes Ø 90 x 20 coaster brake extra wide & slotted

Manufacturer: swiing® ingenious parts · Area of application: Racing · Springs included: Yes · Ø locating bolt: 10 mm · Width: 20 mm · Number of springs: 1 pcs · Ø drum: 90 mm

swiing® revival rear brake cams Grimeca Snowflake | Puch

Total length: 40.1 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø outside: 15.1 mm · Thread size: M6 · Ø axle: 9.85 mm · Wide cam holder: 15 mm · Puch OEM number: 349.2.41.709.1

swiing® revival bearing cone M10.5x1 with dust ring back pedal

Manufacturer: swiing® revival parts · Material: Steel · Surface: gas nitrided · Thread type: MF10.5x1 (fine pitch thread) · Height: 13.3 mm · Width across flats: 15 mm · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Puch OEM number: 320.2.41.014.1

swiing® revival front brake cams Grimeca Snowflake | Puch

Total length: 46.8 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø outside: 15.1 mm · Thread size: M6 · Ø axle: 9.85 mm · Wide cam holder: 15 mm · Puch OEM number: 349.1.40.709.1

swiing® revival return spring Grimeca Snowflake front brake anchor plate Inox | Puch

Ø wire: 2 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: electropolished · Puch OEM number: 349.1.40.719.1

Front brake lever | Puch DS, VS, MV

Material: Steel · Surface: galvanized (blue) · Total length: 49 mm · Ø screw holder: 8.8 mm · Brake lever length (lever length): 58 mm

GPO brake shoes Ø 90 x 18 coaster brake slotted

Slotted: Yes · Manufacturer: GPO · Springs included: Yes · Number of springs: 1 pcs · Width: 18 mm · Ø drum: 90 mm · Area of application: Tuning

swiing® ingenious brake shoes Ø 90 x 18 Grimeca Snowflake rear High End | Puch Maxi

Slotted: No · Manufacturer: swiing® ingenious parts · Area of application: High End · Area of application: Racing · Area of application: Tuning · Color: red · Springs included: Yes · Width: 18 mm · Ø locating bolt: 10 mm · Number of springs: 1 pcs · Ø drum: 90 mm

Rear brake plate galvanized | Puch Maxi S

Manufacturer: Quenching · Ø drum: 80 mm · Material: Steel · Surface: galvanized (blue)

swiing® revival wheel axle set M11 x 180 spoke rear wheel | Puch Maxi, X30

Manufacturer: swiing® revival parts · Ball bearing closed: No · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 180 mm · Width across flats: 15 mm · Width across flats: 17 mm · Width across flats: 19 mm · Shank length: 30 mm · Thread length: 75 mm

NewFren brake shoes Ø 105 x 25

Manufacturer: NewFren · Springs included: No · Width: 25 mm · Number of springs: 2 pcs · Ø locating bolt: 11 mm · Ø drum: 105 mm

swiing® revival ball bearing 14/27/6.3 coaster brake driver

Surface: blank · Bearing type: Ball ring · Bearing cage: Sheet steel cage ball-guided · Stock number: K1052 · Inner ring width: 7 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Ø outside: 27 mm · Ø inside: 14 mm

Grimeca brake shoe spring

Manufacturer: Grimeca · Spring design: Ironing spring · Material: Spring steel · Surface: raw

Nut M8x1 half-height Inox

Material: Chrome steel (colloquially known as stainless steel) · Drive: External hexagon · Nut type: Hexagon nut · Width across flats: 13 mm · Thread type: MF8x1 (fine pitch thread)

66Heroes cap nut M11x1 gold Inox

Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Surface: gold-plated · Ø outside: 16.3 mm · Nut type: Cap nut · Thread type: MF11x1 (fine pitch thread) · Drive: External hexagon · Height: 26.3 mm · Width across flats: 17 mm · Thread depth: 21 mm

Grimeca brake anchor plate NOS | Puch Maxi

Manufacturer: Grimeca · Material: Aluminum · Surface: sandblasted · Ø outside: 110 mm · Ø axle: 11 mm · Ø screw holder: 6 mm · Wide cam holder: 8.5 mm · Brake lever length (lever length): 77 mm · Puch OEM number: 349.2.40.707.2

66Heroes cap nut M12x1 gold Inox

Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Surface: gold-plated · Ø outside: 17 mm · Nut type: Cap nut · Thread type: MF12x1 (fine pitch thread) · Drive: External hexagon · Height: 26.2 mm · Width across flats: 17 mm · Thread depth: 17.8 mm

Dust ring Ø 26 / 16.5 mm (without felt) nickel-plated

Material: Steel · Surface: nickel-plated · Ø outside: 26 mm · Ø inside: 16.5 mm · Height: 4.6 mm

Dust ring Ø 25.5 / 16.5 mm (without felt) nickel-plated

Material: Steel · Surface: nickel-plated · Ø outside: 25.5 mm · Ø inside: 16.5 mm · Height: 4.6 mm

Brake anchor plate HR 90V not cranked Ø 90 mm rear NOS | Puch X30 Velux / Sachs

Manufacturer: Sachs · Material: Steel · Surface: varnished · Ø outside: 89.3 mm · Ø bore: 10.7 mm · Ø External brake pads: 98.3 mm · Ø axle: 10.5 mm · Ø drum: 90 mm · Puch OEM number: 320.4.41.007.2

Wheel hub rear wheel rod brake (with heavy damage) wide version (DE version) NOS

Manufacturer: Sachs · Area of application: Original · Thread type: MF12x1 (fine pitch thread) · Color: silver · Ø axle: 12 mm · Ø drum: 90 mm · Number of spoke holes: 36 pcs · Ø spoke hole: 3.2 mm

Coaster hub HR 90V with sprocket 34 t. NOS | Puch X30 Velux HG

Manufacturer: Sachs · Area of application: Original · Thread type: MF10.5x1 (fine pitch thread) · Color: silver · Ø axle: 10.5 mm · Ø drum: 90 mm · Number of spoke holes: 36 pcs · Puch OEM number: 320.5.41.002.0

Brake anchor plate HR 905 strongly cranked Ø 90 mm rear NOS | Tigra Pionier / Hercules 621

Manufacturer: Sachs · Material: Steel · Surface: galvanized (blue) · Ø outside: 98.3 mm · Ø bore: 10.7 mm · Ø External brake pads: 98.3 mm · Ø axle: 10.5 mm · Ø drum: 90 mm