
10 kΩ interference-suppressed spark plug connector for your moped, scooter, and small motorcycle.
The resistor in the spark plug cap prevents magnetic interference with the ignition system and is especially recommended when using an electronic ignition system (HPI, PVL, Selettra, VEC, etc.).
Since the spark plug connector features a 6 mm SAE clamp mount, the end cap remains attached to the spark plug.
You can find spark plugs (non-shielded) compatible with this spark plug holder, ignition wires, and alternative spark plug connectors in the accessories section.
A quality product from the Japanese manufacturer NGK.
| Manufacturer | NGK |
| Material | Plastic, Rubber |
| Color | black |
| Spark plug socket | SAE |
| Cable available | No |
| Suppressed | Yes |
| Subcategory | Spark plug connector |
| Resistance | 10000 Ω |
| Ø cable | 5 mm, 7 mm |
Accessories & related products
BERU Spark Plug Connector, 1 kΩ, Noise-Suppressed, NOS
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 11.90
Moped fans also bought
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm · Number of components: 1 pcs · Area of application: Standard
EUR 2.90
VEC electronic ignition coil (replaces ignition coil, capacitor & contact breaker)
Height: 48 mm · Manufacturer: VEC · Ø cable holder: 5 mm · Hole spacing: 54 mm · Place of use: Internal (in the ignition) · Color: black · Number of fixing points: 2 pcs · Ø Internal flywheel: 90 mm · Ø mounting hole: 4.6 mm · Cable length: 140 mm · Cable length: 420 mm · Area of application: Original · Area of application: Performance · Area of application: Standard · Total length: 77 mm · Mounting type: Screws
EUR 180.80
Not in stock
Nut M10x1 SW14 Flywheel
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Nut type: Flange nut · Ø outside: 18.8 mm · Nominal diameter (thread): 10 mm · Width across flats: 14 mm · Height: 8.9 mm · Thread type: MF10x1 (fine pitch thread) · Area of application: Standard · Pony OEM number: A4513 · Sachs OEM no.: 0942 072 102
EUR 2.90



