Notched nail Ø 3 x 8 mm Inox

Steel hammer 500 gram

Material: Steel · Total length: 340 mm · Weight: 500 g · Area of application: Workshop accessories

Pointed pliers angled

Area of application: Workshop accessories

Notched nail Ø 2 mm Nameplate motor | Sachs 502 / 503

Manufacturer: Sachs · Total length: 4.4 mm · Ø External head: 3 mm · Ø Pin: 2 mm

Type plate original | Piaggio Ciao, SI, Bravo, Boxer

Manufacturer: Piaggio · Color: black · Total length: 84 mm · Height: 21 mm · Number of fixing points: 2 pcs · Ø mounting hole: 3 mm

GESIPA Ø 2.4 x 6 mm pop rivet nameplate

Ø Rivet pin: 2.4 mm · Ø rivet plate: 4.6 mm · Manufacturer: GESIPA · Rivet pin length: 6.1 mm · Ø bore: 2.5 mm · Clamping range: 1.5 - 3.5 mm

BGS interchangeable head hammer (5 heads)

Manufacturer: BGS · Material: Aluminum · Material: Copper · Material: Nylon · Material: Plastic · Material: Steel · Material: Wood · Diameter: 35 mm · Total length: 305 mm · Number of components: 6 pcs · Area of application: Workshop accessories

GPO license plate holder Inox (CH version)

Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Thread type: M5x0.8 (standard thread) · Color: silver · Total length: 145 mm · Height: 5.3 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Width: 105 mm · Thread length: 8 mm

GPO fork lock | Puch

Ø rotating part: 12 mm · Manufacturer: GPO · Wide locking block: 4.1 mm · Locking block length: 15.3 mm · Material: Brass · Material: Spring steel · Material: Steel · Surface: blank · Ø outside: 12 mm · Width: 17 mm · Length of turned part: 25.6 mm · Total length: 40.8 mm · Ø Pin: 8 mm

GPO Notched pin fork lock Inox

Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Surface: stainless · Nominal diameter: 3 mm · Ø Pin: 2.95 mm · Ø External head: 5 mm · Total length: 10 mm

swiing® revival spring washer pedal axle 0.6 mm

Spring design: Special spring · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: galvanized (blue) · Ø inside: 17 mm · Ø outside: 29 mm · Total length: 1.7 mm · Material thickness: 0.6 mm

GPO pedal cranks chrome (pair) | Puch

Manufacturer: GPO · Wide intake: 28 mm · Material: Steel · Surface: chrome-plated · Thread type: FG14.3 (9/16" 20G) · Color: Chrome · Crank length (center-center): 156 mm · Total length: 180 mm · Ø Pedal wedge: 9.5 mm · Cranking (offset): 37 mm · Cranking (offset): 49 mm · Ø Pedal axle: 16 mm

Hammer screw Ø 2.5/4.2 x 6.3 mm (X30)

Ø External head: 4.2 mm · Material: Steel · Surface: galvanized (blue) · Ø bore: 2.2 mm · Ø outside: 2.5 mm · Total length: 6.3 mm

Hammer head screws Ø 2.9/5 x 8.35 mm (Maxi)

Ø External head: 5.2 mm · Ø Rivet pin: 2.4 mm · Rivet pin length: 0.7 mm · Material: Steel · Surface: galvanized (blue) · Ø bore: 2.6 mm · Ø outside: 2.9 mm · Total length: 8.5 mm · Area of application: Standard

swiing® revival Ø 9.5 mm wedge 4.5° pedal crank galvanized

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M7x1 (standard thread) · Color: silver · Ø outside: 9.5 mm · Angle crank wedge: 4.5° · Total length: 43 mm

Notched nail Ø 2 mm Nameplate motor | Sachs 502 / 503

Manufacturer: Sachs · Total length: 4.4 mm · Ø External head: 3 mm · Ø Pin: 2 mm

Notched nail Ø 2 x 4 mm Inox

Ø Rivet pin: 2 mm · Rivet pin length: 4 mm · Material: Chrome steel (known as Nirosta®) · Surface: blank · Total length: 5.2 mm · Ø bore: 2 mm · Ø External head: 3.5 mm · Area of application: Standard