Special needle sleeve, which was installed on some engines with the corresponding gearwheel. The freewheel sleeve is pressed into the fit of the gearwheel of the first gear.
Can be used on Sachs 503 AB / AC / ADV / ABL automatic engines.
Attention: For the installation of this needle sleeve, the gear must have an inner diameter of 25 mm (there are different versions).
Ø inner: 19 mm
Ø outer: 25.5 mm
Height: 25.3 mm
Type: HCB 121616
Quality product from the Japanese manufacturer NSK.
| Stock number | HCB 121616 |
| Manufacturer | NSK |
| Material | Steel, Sheet metal (steel), Plastic |
| Height | 25.3 mm |
| Ø outside | 25.5 mm |
| Ø inside | 19 mm |
| Sachs | 503 - ABL, AB, AC, ADV |
Moped fans also bought
Oil seal NBR 15/30/7 B AS | Sachs 503, 50/2
Simmering type: B - With sheet metal outer casing / one sealing lip. · Manufacturer: Sachs · Material: NBR · Ø outside: 30 mm · Ø inside: 15 mm · Width: 7 mm · Temperature resistance (min.): -30 - 100 °C · Pony OEM number: A1830 · Sachs OEM no.: 0250 090 000
EUR 6.50
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Stock number: BO15 · Inner ring width: 10 mm · Manufacturer: NSK · Bearing cage: Brass cage ball-guided · Surface: blank · Material: Brass · Bearing type: Shoulder bearing · Material: Steel · Width: 10 mm · Ø inside: 15 mm · Ø outside: 40 mm · Ball bearing closed: No · Area of application: Standard · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001
EUR 29.90
NSK 6201 ball bearing 12/32/10
Stock number: 6201 · Inner ring width: 10 mm · Manufacturer: NSK · Bearing clearance: CM (special/noise-reduced) · Bearing cage: "-" Sheet steel cage ball-guided · Groove ring: No · Material: Steel · Surface: blank · Area of application: Standard · Ø inside: 12 mm · Bearing type: Shoulder bearing · Ø outside: 32 mm · Width: 10 mm · Ball bearing closed: No
EUR 10.20
swiing® revival gearbox cover gasket | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1888)
Manufacturer: swiing® revival parts · Color: sand-colored · Material: Sealing paper · Total length: 200 mm · Width: 130 mm · Thickness: 0.35 mm · Number of components: 1 pcs · Number of fixing points: 6 pcs · Pony OEM number: A1888 · Sachs OEM no.: 0250 150 000
EUR 6.50
Oil seal NBR 15/30/5.5 A crankshaft | Sachs (A4215 & A5602)
Simmering type: A - With rubberized outer part / one sealing lip. · Manufacturer: Sachs · Material: NBR · Surface: rubberized · Place of use: Crankshaft · Ø inside: 15 mm · Ø outside: 30 mm · Width: 5.5 mm · Temperature resistance (min.): -30 - 100 °C · Pony OEM number: A5602 · Sachs OEM no.: 0230 111 100
EUR 9.50
Collection only possible with online purchase and appointment.
