High-quality 21 mm CP carburetor kit with clamp connection for your moped, moped and small motorcycle.
The set was designed by Polini for the Puch Maxi S, N moped / moped models with E50 engine, but can also be used universally for countless other makes and models.
During the development of the CP models, special emphasis was placed on size and weight, making this carburetor particularly compact and around 40% lighter than conventional carburetors.
Due to the compact design, the intake path is very short. Unique is the concentric design of the passage, i.e. a circular passage instead of an oval one as with most other carburettors - a geometry that optimizes the air flow. Modifications to the mixing tube and the use of a larger needle ensure better atomization of the gas mixture.
This should simplify the tuning of the carburetor and enable high performance with low consumption. In addition, all CP carburetors have an oil and vacuum connection.
| Manufacturer | Polini |
| Material | Aluminum |
| Area of application | Tuning |
| Component group Carburetor | Carburetor complete |
| Mounting type | Plug connection |
| Carburetor type | CP |
| Nominal diameter | 21 mm |
| Nozzle thread | M5x0.8 (standard thread) |
| Ø without reducing sleeve | 25 mm |
| Ø Internal connection | 24 mm |
| Ø Air filter connection | 46 mm |
| Ø fuel hose connection | 6 mm |
| Mixed oil connection | Yes |
| Vacuum connection | Yes |
| Choke control | Cable choke |
| Nozzle size | 100 |
| Size of secondary nozzle | 40 |
| Puch |
Accessories & related products
Polini 24 mm carburetor (hand choke)
Manufacturer: Polini · Component group Carburetor: Carburetor complete · Carburetor type: Flat slide valve · Choke control: Hand choke · Nominal diameter: 24 mm · Ø Air filter connection: 49 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Mounting type: Plug connection · Vacuum connection: Yes · Area of application: Tuning · Nozzle thread: M5x0.8 (standard thread)
EUR 180.10
Polini jet set (120 - 138) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Nozzle type: Main nozzle · Nozzle size: 120 · Nozzle size: 122 · Nozzle size: 124 · Nozzle size: 126 · Nozzle size: 128 · Nozzle size: 130 · Nozzle size: 132 · Nozzle size: 134 · Nozzle size: 136 · Nozzle size: 138 · Drive: External hexagon
EUR 48.00
Polini jet set (140 - 158) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Quantity: 10 pcs · Component group Carburetor: Spraying · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 140 · Nozzle size: 142 · Nozzle size: 144 · Nozzle size: 146 · Nozzle size: 148 · Nozzle size: 150 · Nozzle size: 152 · Nozzle size: 154 · Nozzle size: 156 · Nozzle size: 158
EUR 48.00
Polini 26 mm carburetor (hand choke)
Manufacturer: Polini · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: Flat slide valve · Nominal diameter: 26 mm · Ø Inside entrance: 26 mm · Ø Output inside: 26 mm · Ø Air filter connection: 49 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 105 · Size of secondary nozzle: 45 · Total length: 83 mm · Width: 65 mm · Height: 155 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 174.10
Polini 32 mm carburetor (hand choke)
Manufacturer: Polini · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: Flat slide valve · Nominal diameter: 32 mm · Ø Inside entrance: 32 mm · Ø Output inside: 32 mm · Ø Air filter connection: 55 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 122 · Size of secondary nozzle: 42 · Total length: 83 mm · Width: 78 mm · Height: 155 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 228.20
Polini racing exhaust "for race" blanco | Puch Maxi, X30
Manufacturer: Polini · Material: Steel · Surface: blank · Total length: 900 mm · Ø Silencer: 60 mm · Exhaust type: Cone / double cone · Number of fixing points: 2 pcs · Flame tube attachment: Flange · Flame tube attachment: suspended
EUR 444.40
Moped fans also bought
GPO 45 mm cylinder kit 70 ccm | Puch
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Number of fixing points: 4 pcs · Ø cylinder neck: 47.8 mm · Nominal diameter: 45 mm · Ø outlet inside: 24.6 mm · Area of application: Tuning · Inlet window: 21.8 x 14.6 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No
EUR 108.00
EUR 120.00
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Number of components: 3 pcs · Ø outside: 8.3 mm · Ø inside: 4.8 mm · Color: blue · Area of application: Tuning · Total length: 28 mm
EUR 21.50
swiing® revival nozzle set M3.5 (44 - 54) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Total length: 6 mm · Nozzle size: 44 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 54
EUR 19.10
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Camouflaged: Yes · Area of application: Tuning · Surface: sandblasted · Width: 125 mm · Ø cylinder: 45 mm · Total length: 135 mm · Height: 55 mm · Number of fixing points: 4 pcs · Candle thread: short · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 39.50
Athena 45 mm cylinder kit 70 ccm camouflaged | Puch
Manufacturer: Athena · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Displacement: 70 ccm · Nominal diameter: 45 mm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Hole spacing inlet: 38 mm · Number of fixing points: 4 pcs · Ø cylinder neck: 48 mm · Ø outlet inside: 23.5 mm · Inlet window: 22.3 x 14 · Hole spacing outlet: 42 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Area of application: Tuning · Decompressor: No
EUR 190.90
Polini jet set (120 - 138) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Nozzle type: Main nozzle · Nozzle size: 120 · Nozzle size: 122 · Nozzle size: 124 · Nozzle size: 126 · Nozzle size: 128 · Nozzle size: 130 · Nozzle size: 132 · Nozzle size: 134 · Nozzle size: 136 · Nozzle size: 138 · Drive: External hexagon
EUR 48.00
GPO 12 mm intake manifold Puch X30 NG-2AH
Manufacturer: GPO · Material: Aluminum · Ø inside: 12 mm · Ø External connection: 20 mm · Hole spacing inlet: 32 - 38 mm · Total height: 63 mm · Height flange center hole: 52.5 mm · Mounting type: Screws · Total length: 53 mm · Number of fixing points: 2 pcs · Camouflaged: No · Area of application: Original
EUR 48.00
swiing clutch springs reinforced (+50%) | Puch E50
Spring design: Pressure spring · Ø wire: 2 mm · Number of components: 3 pcs · Manufacturer: swiing · Material: Spring steel · Surface: coated · Color: red · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Total length: 26.6 mm · Area of application: Tuning
EUR 21.50
Collection only possible with online purchase and appointment.
