Winter Check-Up
Drives, brakes, steers – but better.
YSS shock absorber Racing 30 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Color: black · Surface: varnished · Damping type: Hydraulic (oil) · Adjustable: Yes · Ø outside: 52 mm · Mounting type: Nuts & bolts · Ø spars: 32 mm · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm · Hole spacing: 330 mm · Total length: 335 mm
EUR 168.70
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Ø bore: 12.2 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 10 mm · Ø External brake pads: 80 mm · Ø outside: 91 mm · Ø axle: 12 mm · Ø screw holder: 6.5 mm · Wide cam holder: 12 mm · Cranking (offset): 8 mm · Brake lever length (lever length): 55 mm · Total length: 187 mm
EUR 84.30
IMCA Shock absorber fork chrome | Piaggio Ciao (Racing)
Manufacturer: IMCA · Material: Steel · Surface: chrome-plated · Color: Chrome · Damping type: Hydraulic (oil) · Adjustable: No · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 170 mm · Total length: 270 mm
EUR 102.40
Shock absorber 30 cm silver / black (pair) | Puch Maxi S, Supermaxi
Material: Aluminum · Material: Plastic · Material: Steel · Surface: coated · Damping type: Spring · Adjustable: No · Color: black · Color: silver · Ø outside: 38.2 mm · Mounting type: Nuts & bolts · Total length: 300 mm · Total length: 330 mm · Ø spars: 25 mm · Number of fixing points: 2 pcs · Ø Fastening inside: 8.1 mm · Hole spacing: 300 mm · Puch OEM number: 349.3.21.550.0 · Puch OEM number: 349.4.21.550.0
EUR 96.40
swiing® ingenious repair kit fork (selection) | Piaggio Ciao PX / C24
Manufacturer: swiing® ingenious parts · Material: Brass · Material: Chrome steel (colloquially known as stainless steel) · Material: Rubber · Material: Spring steel · Surface: electropolished · Color: Chrome · Color: black · Ø outside: 28.4 mm · Ø inside: 20 mm · Ø wire: 4.25 mm · Ø wire: 4.5 mm · Total length: 110 mm
EUR 74.70
swiing® ingenious steering bearing M26x1 (for Ø 30 mm steering head tube) High End
Manufacturer: swiing® ingenious parts · Material: Steel · Color: black · Bearing type: Bearing ring · Ø outside: 43 mm · Ø inside: 26.8 mm · Ø mounting frame: 30.3 mm · Surface: gas nitrided · Thread type: MF26x1 (fine pitch thread)
EUR 66.20
EBR fork chrome reinforced | Puch
Manufacturer: EWC · Material: Steel · Color: Chrome · Surface: chrome-plated · Adjustable: No · Spar end distance (center-center): 140 mm · Ø outer head tube: 26 mm · Ø head tube inside: 22 mm · Ø spars: 28 mm · Head tube length: 180 mm · Fork bridge - center wheel axle: 381 mm · Distance brake cam to wheel axle center-center: 40 mm · Thread type: MF26x1 (fine pitch thread) · Thread length: 57 mm · Total length: 580 mm
EUR 160.30
swiing® revival fork repair kit | Puch
Manufacturer: swiing® revival parts · Puch OEM number: 349.1.30.820.1 · Puch OEM number: 349.1.30.117.1 · Puch OEM number: 349.1.30.137.1 · Puch OEM number: 349.1.30.135.1 · Puch OEM number: 349.1.30.126.1 · Puch OEM number: 349.2.30.134.1 · Puch OEM number: 367.1.30.031.1
EUR 108.40
Brake pads make all the difference
Brake pads transfer the force from your hand to the brake.
If they are too thin or glazed, braking performance is significantly reduced.
Typical signs:
- Long braking distance
- spongy pressure point
- Squeaking or rubbing
Replacing them is not rocket science, but it is important for safety.
Constant pressure point
Disc brakes brake significantly more evenly and efficiently than drum brakes.
Wet conditions and temperature hardly play a role.
Technically, this means:
- direct power transmission
- less fading
- better controllability
Winter is ideal for retrofitting because there is time for precise adjustment.
What the damper really does
The shock absorber keeps the wheel on the ground.
Not only does it provide suspension, it also stabilises the entire chassis.
If it is worn out or incorrectly adjusted,
- the rear end bounces
- the wheel loses grip
- and the handling becomes unstable
A functioning damper provides directional stability and a significantly more stable driving experience.
New
Hot 
Tivedens engine 41 mm cylinder kit S3 fan-cooled | Sachs 50/2 (DE), 50/3
Nominal diameter: 41 mm · Manufacturer: Tivedens Motor AB · Material: Gray cast iron · Surface: varnished · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 44 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 29.5 mm · Hole spacing inlet: 31 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread) · Area of application: Tuning
EUR 349.70
New
Hot
Tivedens engine 41 mm cylinder kit S3 | Sachs 50/2 (DE), 50/3, 50/4
Nominal diameter: 41 mm · Manufacturer: Tivedens Motor AB · Material: Gray cast iron · Surface: varnished · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 44 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 29.5 mm · Hole spacing inlet: 31 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread) · Area of application: Tuning
EUR 349.70
New
Hot
Tivedens engine 41 mm cylinder kit S4 | Sachs 50/2 (DE), 50/3, 50/4
Nominal diameter: 41 mm · Manufacturer: Barikite · Manufacturer: Tivedens Motor AB · Material: Gray cast iron · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 18 mm · Ø outlet inside: 30 mm · Hole spacing inlet: 31 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: MF36x1.5 (fine pitch thread) · Area of application: Tuning
EUR 385.80
OMG fuel tap horizontal M12x1 (with union nut) outgoing at the bottom, metal lever | Puch Maxi S / N
Manufacturer: OMG · Material: Aluminum · Outer width: 18 mm · Surface: blank · Possible lever positions: open / closed / reserve · Material lever: Aluminum · Filter type: Plastic net · Mounting type: screw in (thread) · Installation direction: vertical / vertical · Outlet direction: below · Spare tube shape: curved · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 60 mm · Puch OEM number: 349.3.22.030.0 · Puch OEM number: 349.4.22.030.0
EUR 15.60
Polini diaphragm block | Minarelli horizontal
Manufacturer: Polini · Material: Carbonite · Material: Plastic · Material: Steel · Number of flaps: 4 pcs · Width: 36.3 mm · Width: 39.7 mm · Width: 64.9 mm · Width: 75.2 mm · Membrane material: Carbonite · Thick membrane platelets: 0.35 mm · Mounting type: Screws · Total length: 38.9 mm · Thickness: 3.5 mm · Thread type: M6x1 (standard thread) · Number of fixing points: 4 pcs · Ø mounting hole: 6.4 mm · Hole pattern [mm]: 52.5 x 62 · Hole spacing: 52.5 mm · Hole spacing: 62 mm
EUR 42.10
swiing® revival screw set M8x22 cylinder head cast hub chrome | Puch
Drive: Hexagon socket · Ø External head: 14.8 mm · Manufacturer: swiing® revival parts · Color: Chrome · Material: Steel · Surface: chrome-plated · Number of components: 5 pcs · Screw head: Cylinder head · Thread type: M8x1.25 (standard thread) · Total length: 30 mm · Thread length: 22 mm · Width across flats: 6 mm · Puch OEM number: 321.1.40.205.1
EUR 27.60
Siggnature Tankbar
The legendary Tankbar at Siggnature Bikes in Saland.
Bar service, live music and food truck every first Friday of the month.
Friendly people, bikes and good conversation.
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
