Black racing handlebars in carbon look with bolted crossbar for your moped, moped and small motorcycle. The aluminum handlebar is mounted on the fork plate.
Both balance ends are slightly bent backwards, the left handlebar end is also knurled for additional grip. This extra-wide design gives you maximum control even at high speeds.
Height: 80 mm
Width: 820 mm
Ø tube: 22 mm
Length handlebar ends (for grip mounting): 235 mm
Length fork plate mount: 140 mm
Matching attachments such as clamps, steerer nuts, grips, etc. can be found in the accessories
.| Clamping diameter | 22 mm |
| Color | Carbon |
| Ø outside | 22 mm |
| Width | 820 mm |
| Height | 80 mm |
| Material | Aluminum |
| Fork plate holder length | 140 mm |
| Length handlebar ends | 235 mm |
| Crossbar | Yes |
| Ø Strut | 12 mm |
| Strut length | 240 mm |
| Mounting type | Fork plate |
Accessories & related products
swiing® revival steerer tube nut M26x1 closed fork plate Inox
Drive: External hexagon · Manufacturer: swiing® revival parts · Ø outside: 36.6 mm · Height: 14 mm · Material: Chrome steel (colloquially known as stainless steel) · Thread type: MF26x1 (fine pitch thread) · Nominal diameter (thread): 26 mm · Width across flats: 30 mm
EUR 22.80
Explore categories from Handlebar & stem
Moped fans also bought
Hot 
swiing® ingenious exhaust 22 mm camouflaged 2-piece | Puch Maxi S, N
Ø outside: 59 mm · Color: Chrome · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Ø Silencer: 54.5 mm · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Total length: 910 mm · Flame tube attachment: Flange · Number of fixing points: 4 pcs · Mounting type: Stud bolts & nuts · Mounting type: Welded lug
EUR 162.70
Not so nice 
15 mm intake manifold | Puch E50
Ø inside: 14.5 mm · Material: Aluminum · Camouflaged: Yes · Ø External connection: 20 mm · Total length: 47 mm · Total height: 54 mm · Number of fixing points: 2 pcs · Height flange center hole: 43 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Area of application: Tuning
EUR 14.40
Hot
GPO Gear Ring 45 T, Black | Puch Maxi, X30 NG-2AH
Surface: powder-coated · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Number of fixing points: 6 pcs · Hole spacing: 36.5 mm · Ø mounting hole: 6.7 mm · Material: Steel · Number of teeth: 45 pcs · Color: black · Ø bolt circle: 105.5 mm · Thickness: 4.5 mm · Ø inside: 94 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm
EUR 30.00
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Material: Aluminum · Material: Fiber · Manufacturer: GPO · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 11.90
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nipple shape: Cylinder · Cable length: 2200 mm · Number of components: 1 pcs
EUR 2.90
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.5 mm · Ø nipple: 8 mm · Nipple length: 12 mm · Area of application: Standard · Number of components: 1 pcs · Nipple shape: Barrel (transverse) · Cable length: 1600 mm
EUR 2.90
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Place of use: Frame (+ tank) · Material: Polyvinyl chloride (PVC) · Manufacturer: swiing® revival parts · Color: black · Color: white · Width: 123 mm · Width: 230 mm · Width: 330 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Height: 26 mm · Height: 60 mm · Height: 65 mm · Transferfolie: No
EUR 11.30
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Material: Brass · Manufacturer: Magura · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Thread length: 4 mm · Ø outside: 5 mm · Screw head: Lens head · Total length: 6 mm
EUR 2.40
Working late? Evening hours on Thursday until 20:00
