Black, adjustable shock absorbers with pink coil springs for your moped, moped and small motorcycle.
The hardness or preload of the shock absorbers can be adjusted using the special spring mount.
Length (mount - mount): 300 mm
Outer diameter of coil spring: 50 mm
Holt diameter: 30 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
| Surface | varnished |
| Color | pink, black |
| Damping type | Spring |
| Adjustable | Yes |
| Ø spars | 30 mm |
| Ø Fastening inside | 10 mm |
| Ø outside | 50 mm |
| Number of fixing points | 2 pcs |
| Hole spacing | 300 mm |
| Mounting type | Nuts & bolts |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Contents [ml]: 10 ml · Area of application: Chemistry · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Color: blue · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.30
EUR 2’630.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Material: Steel · Surface: varnished · Color: black · Manufacturer: YSS · Ø outside: 52 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 330 mm · Damping type: Hydraulic (oil) · Adjustable: Yes · Ø Fastening inside: 10 mm · Ø spars: 32 mm
EUR 168.10
MKX shock absorber 30 cm chrome
Material: Aluminum · Material: Steel · Surface: chrome-plated · Color: Chrome · Manufacturer: MKX · Ø outside: 46 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 300 mm · Damping type: Spring · Adjustable: Yes · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm
EUR 60.00
Not in stock
Moped fans also bought
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Color: silver · Material: Chrome steel (known as Nirosta®) · Mounting type: Nuts & bolts · Hole spacing: 30 mm · Hole spacing: 50 mm · Total length: 145 mm · Ø mounting hole: 5 mm · Width: 105 mm · Height: 5.3 mm · Thread type: M5x0.8 (standard thread) · Number of fixing points: 2 pcs · Thread length: 8 mm
EUR 13.10
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Color: silver · Spark plug socket: M4 · Material: Sheet metal (steel) · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Component group Carburetor: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.60
GPO 15 mm carburetor tuning | Puch
Nominal diameter: 15 mm · Manufacturer: GPO · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: SRE · Choke control: Hand choke · Total length: 66 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Mounting type: Plug connection clamped · Height: 95 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: No · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 78.00
Not so nice 
15 mm intake manifold | Puch E50
Camouflaged: Yes · Material: Aluminum · Mounting type: Screws · Ø External connection: 20 mm · Ø inside: 14.5 mm · Hole spacing inlet: 38 mm · Total height: 54 mm · Number of fixing points: 2 pcs · Height flange center hole: 43 mm · Area of application: Tuning · Total length: 47 mm
EUR 14.30
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Surface: galvanized (blue) · Color: black · Color: silver · Material: Plastic · Material: Steel · Number of teeth: 10 pcs · Total length: 175 mm · Ø outside sprocket: 36 mm · Thread type: M6x1 (standard thread) · Number of fixing points: 1 pcs
EUR 11.90
Collection only possible with online purchase and appointment.
