Racing clutch compatible with your Puch Maxi S / N moped equipped with an E50 engine.
This high-quality centrifugal clutch is suitable for racing and tuning applications. The clutch is constructed with three clutch plates and features a reinforcement plate that significantly increases stability. With the three included spring strengths, the clutch engagement characteristics can be adjusted to suit various engine setups. The weakest springs are already installed.
Package Contents:
• Racing clutch, 409 g•
White clutch spring set with 1.5 mm wire diameter•
Green clutch spring set with 1.6 mm wire diameter•
Yellow clutch spring set with 1.7 mm wire diameter
Notes: The clutch should be soaked in oil for 24 hours before installation so that the friction linings can become saturated with oil. After selecting the appropriate clutch springs for your engine, secure the M6 countersunk screws on the racing clutch with medium-strength threadlocker and tighten them to 6 Nm.
You can find the appropriate oil and threadlocker among the accessories.
A quality product from the American manufacturer Jammer Clutches.
Alternative to the original Puch part number: 349.1.12.504.0
| Ø inside | 12.5 mm, 13.9 mm |
| Thickness | 19.75 mm |
| Manufacturer | Jammer |
| Material | Steel |
| Material addition | Composite materials |
| Recording type | Cone mounting |
| Ø outside | 92 mm |
| Surface | burnished |
| Number of jaws | 3 pcs |
| Number of springs | 3 pcs |
| Area of application | Tuning |
| Alternative version of the Puch OEM number | 349.1.12.504.0 |
| Puch | E50 |
Accessories & related products
swiing® revival nut / spring washer clutch E50 | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.8D · Height: 8 mm · Drive: External hexagon · Nominal diameter (thread): 10 mm · Width across flats: 17 mm · Thread type: MF10x1 (fine pitch thread)
EUR 4.70
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.40
EUR 2’640.00/l
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Ø inside: 106 mm · Thickness: 0.5 mm · Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 3.50
Malossi replacement clutch springs Jammer clutch | Puch, Tomos
Spring design: Tension spring · Manufacturer: Malossi · Material: Spring steel · Surface: varnished · Area of application: Tuning · Color: red · Color: white · Color: yellow · Ø wire: 2.2 mm · Ø wire: 2.3 mm · Ø wire: 2.4 mm · Total length: 32.6 mm
EUR 36.10
GPO clutch spring set Jammer clutch "Stage 1" pink
Spring design: Tension spring · Length spring hook: 8 mm · Length spring hook: 14 mm · Ø wire: 1.1 mm · Manufacturer: GPO · Material: Spring steel · Color: pink · Total length: 34 mm · Surface: varnished · Ø inside: 7.7 mm · Ø outside: 9.9 mm · Area of application: Tuning
EUR 14.40
GPO clutch spring set Jammer clutch "Stage 2" blue
Spring design: Tension spring · Length spring hook: 8 mm · Length spring hook: 14 mm · Ø wire: 1.3 mm · Manufacturer: GPO · Material: Spring steel · Color: blue · Total length: 34 mm · Surface: varnished · Ø inside: 7.3 mm · Ø outside: 9.9 mm
EUR 14.40
Explore categories from Clutch
Moped fans also bought
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Number of components: 7 pcs · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Hole pattern [mm]: 44 x 44 · Area of application: Standard · Hole spacing outlet: 42 mm · Hole spacing inlet: 32 - 38 mm · Decompressor: Yes
EUR 11.90
swiing® revival Stud Bolt Set M6x106 | Puch
Manufacturer: swiing® revival parts · Material: Steel · Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Drive: External hexagon · Surface: galvanized (blue) · Width across flats: 10 mm · Nominal diameter (thread): 6 mm · Thread length: 13 mm · Thread length: 18.5 mm · Total length: 106 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.95
swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Quantity: 10 pcs · Nozzle type: Main nozzle · Drive: Slot · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread)
EUR 25.20
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Ø inside: 106 mm · Thickness: 1 mm · Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.70
Working late? Evening hours on Thursday until 20:00
