Engine mount 2.0 for Sachs 50/2, 50/3 and 50/4 engines. Revised version for a better fit of the engine.
The revised version can only be used in conjunction with the engine mount 2.0. Not suitable for the conventional engine mounts.
No more makeshift placement of wooden blocks during engine overhauls and tilting of the engine when tightening the screws.
We offer you an exclusive engine holder with which you can carry out revisions, tuning or other work on the engine conveniently and efficiently.
The mounting bracket can be rotated 360°. The holder is only fixed to one half of the housing. This means that gearbox revisions can be carried out in full.
Figure 1 shows the "Expert 2.0" engine stand with the engine mount. The scope of delivery corresponds to picture 3.
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Material | Steel |
| Surface | galvanized (blue) |
| Manufacturer | swiing® ingenious parts |
| Area of application | Motor bracket |
Suitable for the following models
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) |
Accessories & related products
Hot 
swiing® ingenious "Expert" motor stand
Manufacturer: swiing® ingenious parts · Area of application: Motor bracket · Material: Steel · Surface: varnished · Color: red · Color: white · Total length: 370 mm · Width: 245 mm · Height: 340 mm · Material thickness: 3.5 mm · Ø Receptacle: 25 mm · Ø Receptacle: 35 mm · Hole spacing: 21.5 mm
EUR 90.10
Moped fans like you also bought:
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Number of components: 1 pcs · Total length: 55 mm · Total length: 75 mm · Area of application: (Dis)assembly tool · Strength class: 8.8 · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread)
EUR 11.90
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Surface: galvanized (blue) · Width across flats (trigger): 8 mm · Width across flats (trigger): 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Diameter: 24 mm · Diameter: 40.3 mm · Number of components: 1 pcs · Total length: 120 mm · Area of application: (Dis)assembly tool · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread)
EUR 52.80
GPO clutch trigger (M27x1.25 / M20x1) | Sachs 502, 503
Width across flats (trigger): 27 mm · Manufacturer: GPO · Width across flats Screw: 19 mm · Material: Steel · Surface: blackened · Thread type: MF20x1 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Total length: 57 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool
EUR 24.00
swiing® revival clamping device clutch | Sachs 503, 50/2, 50/3, 50/4
Material: Aluminum · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Manufacturer: swiing® revival parts · Number of components: 4 pcs · Height: 16 mm · Ø inside: 64 mm · Ø outside: 75 mm · Thread length: 40 mm · Area of application: Special tool · Thread type: M6x1 (standard thread) · Sachs OEM no.: 0276 057 000
EUR 36.00
swiing® revival puller clutch basket manual | Sachs
Thickness: 25 mm · Manufacturer: swiing® revival parts · Number of components: 4 pcs · Material: Steel · Surface: blackened · Surface: galvanized (blue) · Thread type: MF12x1.25 (fine pitch thread) · Width across flats Screw: 19 mm · Total length: 106 mm · Area of application: (Dis)assembly tool
EUR 39.60
Not in stock
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Number of components: 7 pcs · Surface: burnished · Material: Steel · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Total length: 130 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm · Area of application: (Dis)assembly tool
EUR 24.00
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Surface: rubberized · Area of application: Special tool · Diameter: 19 mm · Ø inside: 27 mm · Ø outside: 93 mm · Thickness: 5 mm · Ø Pin: 8 mm · Total length: 290 mm · Height: 80 mm · Number of components: 1 pcs
EUR 57.60
Hot
swiing® ingenious "Expert" motor stand
Manufacturer: swiing® ingenious parts · Area of application: Motor bracket · Material: Steel · Surface: varnished · Color: red · Color: white · Total length: 370 mm · Width: 245 mm · Height: 340 mm · Material thickness: 3.5 mm · Ø Receptacle: 25 mm · Ø Receptacle: 35 mm · Hole spacing: 21.5 mm
EUR 90.10
Collection only possible with online purchase and appointment.
