Set
Hot 
World-class racing exhaust for your Puch Maxi S & N moped / moped with E50 engine and correspondingly large racing cylinder with exhaust outlet.
This is a thoroughbred racing muffler with an impressive resonance kick that delivers brute power directly to the rear wheel. The resonance pot dominates over the entire power band, pulls powerfully and showed noticeably more energy in endurance tests compared to comparable alternatives.
The racing wing is handmade from 0.8 mm thick material and leaves nothing to be desired in terms of performance, quality and accuracy of fit. The 3-point mounting of the muffler with additional reinforcement ensures stability and considerably reduces the risk of fatigue fracture. With a protective coating applied at the factory, the racing pot is ready for immediate installation.
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | varnished |
| Ø Silencer | 60 mm |
| Exhaust type | Cone / double cone |
| Puch | E50 |
Accessories & related products
Parmakit 47 mm cylinder kit without head | Puch
Manufacturer: Parmakit · Material: Aluminum · Surface: sandblasted · Displacement: 75 ccm · Nominal diameter: 47 mm · Area of application: Tuning · Crankshaft stroke: 43 mm · Ø cylinder neck: 49.5 mm · Ø outlet inside: 28 mm · Ø piston pin (B): 12 mm · Inlet window: 29 x 16 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 46 mm · Outlet type: slanted · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 45 mm · Thread outlet: M6x1 (standard thread) · Decompressor: No · Camouflaged: No · Number of fixing points: 4 pcs
EUR 372.40
HK Clutch "Racing" Kickstarter Aramid | Puch E50
Manufacturer: HK Clutches · Material: Steel · Material addition: Aluminum · Area of application: Racing · Number of jaws: 3 pcs · Ø outside: 93 mm · Recording type: Cone mounting · Ø inside: 13.6 mm · Ø inside: 14.6 mm · Thickness: 20.3 mm · Number of springs: 3 pcs
EUR 372.40
Gilardoni italkit 47 mm cylinder kit without cylinder head | Puch
Manufacturer: Gilardoni italkit · Material: Aluminum · Surface: sandblasted · Displacement: 75 ccm · Nominal diameter: 47 mm · Area of application: Tuning · Crankshaft stroke: 43 mm · Ø cylinder neck: 51 mm · Ø outlet inside: 26.5 mm · Ø Inlet inside: 18.3 mm · Ø piston pin (B): 12 mm · Inlet window: 38.5 x 25.8 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 35.5 mm · Hole spacing inlet: 60 mm · Outlet type: slanted · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Decompressor: No · Camouflaged: No · Number of fixing points: 4 pcs
EUR 252.20
PVL internal rotor ignition clockwise without keyway
Manufacturer: PVL · Area of application: High End · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Material: Aluminum · Direction of rotation: right · Ø mounting plate: 90 mm · Mounting type: Screws · Number of fixing points: 3 pcs
EUR 300.30
swiing® ingenious EVO ignition | Puch E50, Z50
Manufacturer: swiing® ingenious parts · Area of application: High End · Area of application: Racing · Area of application: Tuning · Light coil voltage: 12 V · Tension: 12 V · Performance: 60 W · Direction of rotation: any · Ø mounting plate: 90 mm · Ø Internal flywheel: 63.5 mm · Ø Flywheel outside: 75 mm · Mounting type: Screws · Number of fixing points: 3 pcs
EUR 300.30
Polini CP 23 mm carburetor (hand choke)
Manufacturer: Polini · Nominal diameter: 23 mm · Material: Aluminum · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: CP · Total length: 71.3 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Ø Inside entrance: 23 mm · Width: 66 mm · Ø Output inside: 23 mm · Height: 136 mm · Ø Air filter connection: 46 mm · Mounting type: Plug connection clamped · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 110 · Size of secondary nozzle: 40
EUR 180.10
Moped fans also bought
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm
EUR 3.35
VOCA silencer black with 3-point mount
Manufacturer: VOCA · Color: black · Material: Aluminum · Material: Chrome steel (known as Nirosta®) · Surface: anodized · Ø Silencer: 60.8 mm · Ø inside: 20.3 mm · Ø bolt circle: 46 mm · Total length: 220 mm · Total length: 235 mm · Number of fixing points: 3 pcs
EUR 108.00
Not in stock
VOCA silencer red with 3-point mount
Manufacturer: VOCA · Color: black · Color: red · Material: Aluminum · Material: Chrome steel (known as Nirosta®) · Surface: anodized · Ø Silencer: 60.8 mm · Ø inside: 20.3 mm · Ø bolt circle: 46 mm · Total length: 220 mm · Thread type: M6x1 (standard thread) · Number of fixing points: 3 pcs
EUR 108.00
Collection only possible with online purchase and appointment.
