Original, red starter lever for Dell'Orto SHA type 3 carburetor on your Piaggio Ciao C24 moped / moped with left-hand starter choke.
Note: Combined with the matching choke plate and the additionally required mounting clip, you can also install this choke lever on the older Ciao SC, P and PX models.
The mounting clip mentioned above, the hand choke lever on the carburetor and alternative choke rods can be found in the accessories section.
| Ø outside | 4 mm |
| Manufacturer | swiing® revival parts |
| Material | Steel, Plastic |
| Component group Carburetor | Choke control |
| Surface | galvanized (blue) |
| Width | 23.2 mm |
| Carburetor type | SHA (Piaggio) |
| Height | 21.6 mm |
| Total length | 95 mm |
| Choke control | Hand choke |
| Piaggio OEM number | 297837 |
| Piaggio | Ciao - C24 |
Accessories & related products
Hot 
Dell'Orto 13/13 SHA carburetor hand choke | Piaggio Ciao PX / C24, Bravo, SUPERbravo
Height: 96 mm · Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Width: 60 mm · Carburetor type: SHA (Piaggio) · Nominal diameter: 13 mm · Total length: 46 mm · Color: black · Ø without reducing sleeve: 18 mm · Area of application: Tuning · Ø Inside entrance: 13 mm · Ø Internal connection: 16 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 66
EUR 72.20
Dell'Orto 12/7 carburetor hand choke original | Piaggio Ciao PX
Nominal diameter: 12 mm · Manufacturer: Dell'Orto · Area of application: Original · Component group Carburetor: Carburetor complete · Carburetor type: SHA (Piaggio) · Width: 60 mm · Total length: 45 mm · Height: 97 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 18 mm · Nozzle size: 36 · Ø Inside entrance: 7 mm · Ø Internal connection: 16 mm · Mounting type: Plug connection clamped · Ø Output inside: 12 mm · Ø Air filter connection: 50.8 mm · Choke control: Hand choke
EUR 78.30
Choke holder plastic carburetor original | Piaggio Ciao
Material: Plastic · Thickness: 4.6 mm · Manufacturer: swiing® revival parts · Number of fixing points: 1 pcs · Ø mounting hole: 5.8 mm · Component group Carburetor: Adjusting screws, float, etc. · Color: black · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Piaggio OEM number: 188164
EUR 7.10
GPO Choke lever Dell'Orto SHA Type 3 black | Piaggio Ciao PX, C24
Height: 21.5 mm · Manufacturer: GPO · Material: Plastic · Material: Steel · Component group Carburetor: Choke control · Surface: galvanized (blue) · Width: 16 mm · Ø outside: 4 mm · Carburetor type: SHA (Piaggio) · Total length: 92 mm · Choke control: Hand choke · Piaggio OEM number: 188772 · Piaggio OEM number: 297837
EUR 24.00
GPO Choke lever Dell'Orto SHA Type 3 red | Piaggio Ciao PX, C24
Material: Plastic · Material: Steel · Surface: galvanized (blue) · Total length: 92 mm · Width: 16 mm · Height: 21.5 mm · Manufacturer: GPO · Ø outside: 4 mm · Component group Carburetor: Choke control · Carburetor type: SHA (Piaggio) · Choke control: Hand choke · Piaggio OEM number: 188772 · Piaggio OEM number: 297837
EUR 24.00
Moped fans also bought
Speedometer 60 km/h, Ø 48 mm (black dial)
Ø Receptacle: 48 mm · Total height: 70 mm · Manufacturer: Made in Germany · Material: Metal · Material: Plastic · Surface: chrome-plated · Ø outside: 50.4 mm · Maximum speed: 60 Km/h · Lighting: Light slit · Color: Chrome · Signal type Tacho: analog · Color: black · Color: red · Color: white · 4-edge speedometer cable: 1.8 mm · Depth: 50 mm · Thread type: MF10x1 (fine pitch thread)
EUR 72.20
Hot
swiing® revival nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Total length: 8 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70
EUR 25.20
Hot
Malossi air filter | Piaggio Ciao, SI, Bravo, Boxer
Height: 88.7 mm · Manufacturer: Malossi · Material: Plastic · Width: 95 mm · Ø outside: 53.2 mm · Filter type: Foam · Total length: 31.2 mm · Color: black · Area of application: Tuning · Ø Internal connection: 51 mm · Mounting type: Plug connection clamped · Camouflaged: No
EUR 24.00
Working late? Evening hours on Thursday until 20:00
