Set of clamping shells for mounting the handlebars on the fork plate of original and reproduction forks of various Puch mopeds / mopeds.
Outer dimensions (lxwxh): 47 x 17 x 26 mm
Hole spacing: 30 mm
Ø bore: 7.3 mm
Material: aluminium, transparent anodized
Matching mounting screws, fork clamps and other mounting brackets can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Aluminum |
| Surface | anodized |
| Width | 17 mm |
| Height | 26 mm |
| Ø mounting hole | 7.3 mm |
| Clamping diameter | 22 mm |
| Number of fixing points | 2 pcs |
| Hole spacing | 30 mm |
| Total length | 47 mm |
| Puch |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Contents: 10 ml · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.40
EUR 2’640.00/l
Screw M7x40 cylinder head hexagon socket, galvanized (clamping bridge)
Manufacturer: Made in Italy · Material: Steel · Surface: galvanized (blue) · Thread type: M7x1 (standard thread) · Drive: Hexagon socket · Screw head: Cylinder head · Width across flats: 6 mm · Shank: No · Thread length: 40 mm · Strength class: 8.8
EUR 2.90
66HEROES Clamping bridges aluminum black | Puch
Manufacturer: 66HEROES · Material: Aluminum · Surface: anodized · Color: black-matt · Total length: 49 mm · Width: 22 mm · Height: 26 mm · Clamping diameter: 22 mm · Number of fixing points: 2 pcs · Ø mounting hole: 7.3 mm · Hole spacing: 30 mm
EUR 34.90
swiing® revival clamping bridges aluminum green | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Surface: anodized · Color: green · Total length: 47 mm · Width: 17 mm · Height: 26 mm · Clamping diameter: 22 mm · Number of fixing points: 2 pcs · Ø mounting hole: 7.3 mm · Hole spacing: 30 mm
EUR 28.80
swiing® revival clamping bridges aluminum blue | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Surface: anodized · Color: blue · Total length: 47 mm · Width: 17 mm · Height: 26 mm · Clamping diameter: 22 mm · Number of fixing points: 2 pcs · Ø mounting hole: 7.3 mm · Hole spacing: 30 mm
EUR 28.80
Explore categories from Handlebar & stem
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø bore: 4 mm · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø Pin: 3.94 mm
EUR 15.10
Hot
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.60
GPO 15 mm carburetor tuning | Puch
Nominal diameter: 15 mm · Manufacturer: GPO · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Width: 50 mm · Carburetor type: SRE · Height: 95 mm · Mounting type: Plug connection clamped · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Total length: 66 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Area of application: Tuning · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 78.30
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Ø Stranded wire: 1.5 mm · Nipple shape: Barrel (transverse) · Ø nipple: 8 mm · Nipple length: 12 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 1600 mm · Area of application: Standard
EUR 2.90
Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11.90
swiing® revival screw M7x35 clamping bridge | Puch
Drive: Hexagon socket · Ø External head: 10.5 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Screw head: Cylinder head · Shank: No · Strength class: 8.8 · Thread type: M7x1 (standard thread) · Total length: 41.6 mm · Thread length: 34.6 mm · Width across flats: 5 mm · Area of application: Standard
EUR 3.50
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
