TECNO “off road EVO” exhaust system designed for your Puch Maxi moped.
This is a sport-tuned exhaust system specifically designed for tuned cylinders with straight-through exhaust ports. The system stands out with its eye-catching design and a powerful, distinctive sound that clearly emphasizes its sporty character.
The curved pipe between the resonator and the rear muffler creates additional legroom. However, as is typical with performance-oriented exhaust systems, high surface temperatures may occur; therefore, appropriate protection against contact or caution is advised.
All fuel valve positions are compatible, and installation of the right-side mounting bracket is also possible.
Scope of delivery:
- Exhaust with rear silencer
- Mounting bracket
- Rubber mounts
- 3D brass nut
Note: When installing the exhaust system, you may need to make adjustments to the bracket on the cylinder stud. The paint coating does not withstand heat well and can melt quickly in the area around the manifold. Additionally, the right-side fairing cannot be reattached after the muffler is installed.
You can find the other standard screws, nuts, exhaust gasket, heat-resistant paint, and heat-resistant tape in the accessories section.
A brand-name product from the Portuguese manufacturer TECNO.
| Manufacturer | TECNO |
| Material | Steel |
| Color | black-matt |
| Total length | 820 mm |
| Ø Silencer | 50 mm |
| Number of fixing points | 4 pcs |
| Ø Flame tube outside | 25 mm |
| Exhaust type | Cone / double cone, Snail |
| Mounting type | Stud bolts & nuts |
| Flame tube attachment | Stud bolts & nuts |
| Puch | E50 |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.40
EUR 2’640.00/l
swiing® revival stud bolt M6x38 inlet/outlet galvanized (10.9 strength)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Total length: 38 mm · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Strength class: 10.9 · Thread length: 11 mm · Thread length: 19 mm
EUR 2.40
Normio M6 6.4/12/1.6 Galvanized Washer
Ø inside: 6.4 mm · Ø outside: 12 mm · Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Thread size: M6 · Nominal diameter inside: 6 mm · Nominal diameter (thread): 6 mm · Thickness: 1.6 mm · Hardness [HV]: 140 HV · Pony OEM number: A4515 · Sachs OEM no.: 0944 142 002
EUR 0.50
Normio M6 Galvanized Nut
Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.8D · Nominal diameter (thread): 6 mm · Drive: External hexagon · Height: 4.8 mm · Width across flats: 10 mm · Thread type: M6x1 (standard thread) · Strength class: 8 · Area of application: Standard
EUR 0.60
Normio M6x16 Hex Head Screw, Galvanized
Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Total length: 20 mm · Screw head: Hexagon · Thread type: M6x1 (standard thread) · Shank: No · Nominal diameter (thread): 6 mm · Width across flats: 10 mm · Strength class: 8.8 · Thread length: 16 mm
EUR 1.45
Normio M8 Galvanized Lock Nut
Height: 8 mm · Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Nut type: Self-securing nut · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Nominal diameter (thread): 8 mm · Width across flats: 13 mm · Strength class: 8
EUR 1.55
TECNO exhaust "off road EVO" blank | Puch
Manufacturer: TECNO · Material: Steel · Surface: raw · Ø Silencer: 50 mm · Total length: 820 mm · Ø Flame tube outside: 25 mm · Exhaust type: Cone / double cone · Exhaust type: Snail · Number of fixing points: 4 pcs · Mounting type: Stud bolts & nuts · Flame tube attachment: Stud bolts & nuts
EUR 168.70
Explore categories from Exhaust system
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain pitch: 1/2" x 3/16" · Chain lock type: Spring lock · Ø bore: 4 mm · Ø Pin: 3.94 mm
EUR 15.10
Airsal 45 mm cylinder kit 70 ccm camouflaged | Puch
Manufacturer: Airsal · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Surface: sandblasted · Crankshaft stroke: 43 mm · Nominal diameter: 45 mm · Displacement: 70 ccm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Inlet window: 23.5 / 20 x 15 mm · Hole spacing outlet: 42 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Number of fixing points: 4 pcs · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Decompressor: Yes
EUR 120.50
Hot
EBR fork reinforced black | Puch
Manufacturer: EWC · Material: Steel · Surface: chrome-plated · Color: Chrome · Color: black · Total length: 580 mm · Adjustable: No · Ø spars: 28 mm · Spar end distance (center-center): 140 mm · Ø outer head tube: 26 mm · Ø head tube inside: 22 mm · Head tube length: 180 mm · Thread type: MF26x1 (fine pitch thread) · Fork bridge - center wheel axle: 381 mm · Distance brake cam to wheel axle center-center: 40 mm · Thread length: 57 mm
EUR 160.30
Hot
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Total length: 30 mm · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Strength class: 10.9 · Thread length: 12 mm
EUR 2.20
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Nipple length: 5 mm
EUR 2.90
GPO sprocket 9 - 21 teeth wide | Puch
Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: Hardened · Recording type: Interlocking · Chain pitch: 1/2" x 3/16" · Number of teeth: 9 pcs · Number of teeth: 10 pcs · Number of teeth: 11 pcs · Number of teeth: 12 pcs · Number of teeth: 13 pcs · Number of teeth: 14 pcs · Number of teeth: 15 pcs · Number of teeth: 16 pcs · Number of teeth: 17 pcs · Number of teeth: 18 pcs · Number of teeth: 19 pcs · Number of teeth: 20 pcs · Number of teeth: 21 pcs · Total thickness: 4.6 mm
EUR 9.55
Working late? Evening hours on Thursday until 20:00
