Black, adjustable dampers for your moped, moped and small motorcycle.
The hardness or the preload of the dampers can be adjusted by the special spring mount.
Length (mount - mount): 260 mm
Outer diameter of coil spring: 44 mm
Holt diameter: 28 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Branded product from the manufacturer Xtreme.
| Ø outside | 44 mm |
| Manufacturer | Xtreme |
| Surface | varnished |
| Damping type | Spring |
| Mounting type | Nuts & bolts |
| Adjustable | Yes |
| Color | black |
| Ø Fastening inside | 10 mm |
| Ø spars | 28 mm |
| Number of fixing points | 2 pcs |
| Hole spacing | 260 mm |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Color: blue · Contents: 10 ml · Area of application: Chemistry · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Temperature resistance (min.): -75 - 200 °C · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25.70
EUR 2’570.00/l
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Number of components: 17 pcs · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Drive: External hexagon · Screw head: Hexagon · Thread type: M8x1.25 (standard thread)
EUR 21.00
MKX shock absorber 26 cm chrome
Manufacturer: MKX · Ø outside: 46 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 260 mm · Color: Chrome · Damping type: Spring · Adjustable: Yes · Surface: chrome-plated · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm
EUR 58.50
Explore categories from Shock absorber & swingarm
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Manufacturer: Magura · Ø Cable bushing: 2.3 mm · Ø Bundle: 6 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø outside: 8 mm · Total length: 15 mm · Area of application: Standard · Thread type: M6x1 (standard thread) · Thread length: 7 mm · Width across flats: 7 mm
EUR 2.95
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Thread type: MF12x1 (fine pitch thread) · Spare tube shape: curved · Reserve level: 70 mm · Mounting type: Union nut
EUR 11.60
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Screw head: Lens head · Manufacturer: Magura · Ø Cable bushing: 1.6 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø outside: 5 mm · Total length: 6 mm · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
EUR 2.35
swiing® revival side protection screw set black | Puch Maxi S
Drive: Slot · Drive: Triangular head · Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Total length: 47 mm · Total length: 60 mm · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Thread length: 50 mm
EUR 15.10
Collection only possible with online purchase and appointment.
