Adjustable oil pressure shock absorbers in black with chrome-plated coil spring for your moped, moped and small motorcycle.
The hardness or preload of the springs can be adjusted in five stages thanks to the special spring mount. The rear springs should always be secured with large washers to prevent the bearing bushes from shifting when lateral forces occur.
Length (mount – mount): 300 mm
Ø outer spiral spring: 52 mm
Ø spars: 32 mm
Ø bushings for fastening: 10 mm / 12 mm
Color: black / chrome
The scope of delivery corresponds to one pair.
You can find rear springs from other manufacturers as well as the washers and fastening material in the accessories section.
Quality product from the manufacturer YSS.
| Manufacturer | YSS |
| Material | Steel |
| Surface | varnished, chrome-plated |
| Damping type | Hydraulic (oil) |
| Mounting type | Nuts & bolts |
| Adjustable | Yes |
| Total length | 330 mm |
| Ø outside | 52 mm |
| Ø spars | 32 mm |
| Ø Fastening inside | 10 mm, 12 mm |
| Number of fixing points | 2 pcs |
| Color | black, Chrome |
| Hole spacing | 300 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.40
EUR 2’640.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Surface: varnished · Color: black · Damping type: Hydraulic (oil) · Mounting type: Nuts & bolts · Adjustable: Yes · Number of fixing points: 2 pcs · Ø outside: 52 mm · Hole spacing: 330 mm · Ø spars: 32 mm · Ø Fastening inside: 10 mm · Total length: 335 mm
EUR 156.70
IMCA shock absorber 30 cm chrome / black
Manufacturer: IMCA · Material: Steel · Surface: chrome-plated · Surface: varnished · Color: Chrome · Color: black · Mounting type: Nuts & bolts · Damping type: Spring · Adjustable: Yes · Number of fixing points: 2 pcs · Ø outside: 45 mm · Hole spacing: 300 mm · Ø spars: 28 mm · Ø Fastening inside: 10 mm · Total length: 330 mm
EUR 72.20
swiing® revival screw set shock absorber mounting with axle galvanized | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Steel · Nominal diameter (thread): 8 mm · Screw head: Hexagon · Surface: galvanized (blue) · Drive: External hexagon · Number of components: 17 pcs · Thread type: M8x1.25 (standard thread)
EUR 14.40
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Nominal diameter (thread): 8 mm · Screw head: Hexagon · Drive: External hexagon · Number of components: 17 pcs · Thread type: M8x1.25 (standard thread)
EUR 21.60
Explore categories from Shock absorber & swingarm
Moped fans also bought
Hot 
Wippermann drive chain No.18 (double reinforced)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: Wippermann · Material: Steel · Color: gray · Number of chain links: 114 pcs · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Surface: blank / oiled · Ø bore: 4.2 mm · Ø Pin: 4.15 mm
EUR 40.90
Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Thread type: MF12x1 (fine pitch thread)
EUR 11.90
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 45 mm · Number of fixing points: 4 pcs · Height: 55 mm · Candle thread: short · Width: 125 mm · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes · Total length: 135 mm · Area of application: Tuning
EUR 39.70
Karcoma fuel filter 24 mm plastic / paper
Manufacturer: Karcoma · Material: Paper · Material: Plastic · Color: transparent · Color: yellow · Total length: 35 mm · Total length: 60 mm · Filter type: Filter paper · demountable: No · Ø inside: 4.7 mm · Ø outside: 24 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7.3 mm
EUR 16.30
Hot
swiing® revival Pedal Crank Set, Chrome | Puch
Manufacturer: swiing® revival parts · Wide intake: 28 mm · Material: Steel · Color: Chrome · Crank length (center-center): 156 mm · Total length: 180 mm · Surface: chrome-plated · Ø Pedal wedge: 9.5 mm · Ø Pedal axle: 16 mm · Cranking (offset): 37 mm · Cranking (offset): 49 mm · Thread type: FG14.3 (9/16" 20G)
EUR 90.30
Working late? Evening hours on Thursday until 20:00
