Black, front mudguard made of stainless steel for your Puch X30 NS, NL, NG-2AH, N-2AH, Puch X30-A, Puch Sprinter and Puch Supermaxi LG1 / LG2 moped / moped.
Since the front mudguard is folded on both sides, there are no sharp edges, which significantly reduces the risk of injury. Furthermore, it is still possible to use an edge protector or splash guard flap. Corresponding holes must still be drilled if required.
All original holes are provided for mounting the side and lower mudguard struts.
To mount cable guides, holes are also already incorporated on both sides of the mudguard.
Note: These are B-grade goods. Unfortunately, the mudguards were insufficiently protected during transportation. Therefore, scratches may be present. The black color should therefore be regarded as a primer rather than a final coat of paint. The folded ends may also have been finished a little more beautifully.
Further parts for your wheel fairing, such as paint polish or fastening material, can be found in the accessories section.
| Material | Chrome steel (colloquially known as stainless steel) |
| Surface | varnished |
| Color | black |
| Wheel size | 17 " |
| Folding the ends | closed folded |
| Shape of the mudguard | round |
| Total length over ends | 560 mm |
| Scope | 700 mm |
| Mounting type | Nuts & bolts |
| Wide mudguard profile | 80 mm |
| Height of mudguard profile | 35 mm |
| Total height from support surface to top edge | 180 mm |
| Puch |
Ratings
Accessories & related products
swiing® revival 17" front fender Inox | Puch X30 NS, NL, NG-2AH, N-2AH, Supermaxi LG1
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Color: Chrome · Surface: polished · Folding the ends: closed folded · Shape of the mudguard: round · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Mounting type: Nuts & bolts · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm · Wheel size: 17 "
EUR 70.20
swiing® revival 17" front fender "Retro" Inox black | Puch X30 NS, NL, NG-2AH, N-2AH, LG1/LG2
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Color: black · Surface: varnished · Folding the ends: closed folded · Shape of the mudguard: round · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm · Mounting type: Nuts & bolts · Wheel size: 17 "
EUR 70.20
GPO mudguard strut front 17" black
Manufacturer: GPO · Material: Steel · Surface: varnished · Color: black · Wheel size: 17 " · Total length: 305 mm · Distance mudguard - center hole: 300 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs · Ø mounting hole: 7 mm · Ø mounting hole: 12.5 mm
EUR 17.50
swiing® revival mudguard arch 17" front black
Manufacturer: swiing® revival parts · Material: Steel · Surface: varnished · Color: black · Wheel size: 17 " · Total length: 270 mm · Distance mudguard - center hole: 212 mm · Distance mudguard - center hole: 247 mm · Outer width: 130 mm · Mounting type: Nuts & bolts · Number of fixing points: 6 pcs · Hole spacing: 35 mm · Ø mounting hole: 5.9 mm · Ø mounting hole: 6.3 mm · Wide intake: 115 mm
EUR 23.30
Explore categories from Mudguard
Moped fans also bought
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Color: black · Color: silver · Number of teeth: 10 pcs · Ø outside sprocket: 36 mm · Thread type: M6x1 (standard thread) · Total length: 175 mm · Number of fixing points: 1 pcs
EUR 11.60
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø mounting hole: 6.7 mm · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Color: black · Ø inside: 94 mm · Number of teeth: 45 pcs · Thickness: 4.5 mm · Ø bolt circle: 105.5 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Number of fixing points: 6 pcs
EUR 23.30
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2200 mm · Area of application: Standard
EUR 2.80
swiing® revival side protection screw set black | Puch Maxi S
Drive: Slot · Drive: Triangular head · Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm · Thread type: M5x0.8 (standard thread)
EUR 15.10
Not so nice 
Luggage carrier black | Puch Maxi S
Ø mounting hole: 8.2 mm · Ø mounting hole: 8.8 mm · Material: Steel · Surface: varnished · Color: black · Wheel size: 17 " · Width: 168 mm · Hole spacing: 29 mm · Total length: 425 mm · Mounting type: Nuts & bolts · Height: 32 mm · Number of fixing points: 4 pcs
EUR 23.30
GPO side bars black matt (1A quality) | Puch Maxi S
Ø mounting hole: 8.1 mm · Manufacturer: GPO · Material: Steel · Surface: varnished · Color: black · Width: 170 mm · Ø outside: 12.5 mm · Hole spacing: 410 mm · Total length: 420 mm · Mounting type: Screws · Height: 35 mm · Number of fixing points: 4 pcs
EUR 35.00
GPO mudguard strut front 17" black
Manufacturer: GPO · Material: Steel · Surface: varnished · Color: black · Wheel size: 17 " · Total length: 305 mm · Distance mudguard - center hole: 300 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs · Ø mounting hole: 7 mm · Ø mounting hole: 12.5 mm
EUR 17.50
swiing® revival mudguard arch 17" front black
Manufacturer: swiing® revival parts · Material: Steel · Surface: varnished · Color: black · Wheel size: 17 " · Total length: 270 mm · Distance mudguard - center hole: 212 mm · Distance mudguard - center hole: 247 mm · Outer width: 130 mm · Mounting type: Nuts & bolts · Number of fixing points: 6 pcs · Hole spacing: 35 mm · Ø mounting hole: 5.9 mm · Ø mounting hole: 6.3 mm · Wide intake: 115 mm
EUR 23.30
Collection only possible with online purchase and appointment.
