38 mm cylinder head, compatible with your Puch Maxi S / N, Supermaxi LG1 / LG2, and your X30 Sport NS / NL moped with an E50 / ZA50 (air-cooled) / ZA50 (catalytic converter) or Z50 engine.
The gray combustion chamber cover is perfectly suited for the corresponding AKOA 38 mm cylinders as well as for other 50 cc cylinders and features an optimized combustion chamber compared to the original. The original design is harmoniously echoed by the cast-in Puch stamp on the underside.
It is important to note that there is no decompression hole.
You can find the matching cylinder head gasket, installation hardware, and our recommended spark plugs in the accessories section.
Brand-name product from the manufacturer AKOA.
Original Puch part numbers: 325.1.10.001.1, 349.1.10.101.1, 349.1.10.301.1, 349.3.10.101.1, 349.4.10.001.1
| Manufacturer | AKOA |
| Material | Aluminum |
| Ø cylinder | 38 mm |
| Total length | 132.2 mm |
| Height | 54.5 mm |
| Hole pattern [mm] | 44 x 44 |
| Candle thread | short |
| Decompressor | No |
| Number of fixing points | 4 pcs |
| Width | 123.2 mm |
| Area of application | Tuning |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
GPO 38 mm gasket cylinder head 0.4 mm aluminum | Puch
Manufacturer: GPO · Material: Aluminum · Ø inside: 39 mm · Nominal diameter: 39 mm · Place of use: Cylinder head · Ø cylinder: 38 mm · Thickness: 0.4 mm · Ø screw holder: 7 mm · Hole pattern [mm]: 44 x 44 · Area of application: Standard · Puch OEM number: 349.3.10.013.1
EUR 3.00
swiing® revival Stud Bolt Set M6x106 | Puch
Manufacturer: swiing® revival parts · Thread type: M6x1 (standard thread) · Material: Steel · Diameter: 5.9 mm · Surface: galvanized (blue) · Nominal diameter (thread): 6 mm · Thread length: 13 mm · Thread length: 18.5 mm · Total length: 106 mm · Width across flats: 10 mm · Drive: External hexagon · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.95
Ripp-Lock washer M6 6.2/14/1.4 galvanized
Material: Steel · Surface: galvanized (blue) · Thread size: M6 · Ø inside: 6.2 mm · Nominal diameter inside: 6 mm · Nominal diameter (thread): 6 mm · Ø outside: 14 mm · Thickness: 1.4 mm · Alternative version of the Pony OEM number: A1644 · Pony OEM number: A1542 · Alternative version of the Sachs OEM number: 0245 023 002 · Sachs OEM no.: 0244 021 000
EUR 0.85
Explore categories from Cylinder
Moped fans also bought
Hot 
swiing® revival 12 mm carburetor "original" | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Color: gray · Nominal diameter: 12 mm · Width: 50 mm · Carburetor type: SRE · Total length: 65 mm · Height: 108 mm · Camouflaged: No · Ø Inside entrance: 12 mm · Ø Internal connection: 20 mm · Area of application: Standard · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.15 · Nozzle size: 52 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0
EUR 84.30
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Ø inside: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Hole spacing inlet: 38 mm · Mounting type: Screws · Camouflaged: Yes · Number of fixing points: 2 pcs · Total length: 46 mm · Ø External connection: 20 mm · Height flange center hole: 43 mm · Total height: 53 mm · Area of application: Tuning · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1
EUR 42.10
Working late? Evening hours on Thursday until 20:00
