High-quality Streetpower racing muffler for your Puch Maxi S moped / moped.
The racing exhaust, which is handmade in Switzerland, is suitable for cylinder kits with a diameter of 43 - 45 mm and a straight outlet.
The tuning exhaust achieves its maximum performance in the upper speed range. The quality of workmanship corresponds to the standard of RHR exhausts and the performance level is roughly on a par with Homoet exhausts.
Note: If you want to continue using your pedal mechanism, you will need a pedal axle extension.
The main pedal can still be used, but may require minor adjustments.
The surface is bare and untreated. A protective coating is required to protect the exhaust system from rust.
The described axle extension, protective coating and other tuning parts can be found in the accessories section.
Branded product from the manufacturer AKOA.
| Manufacturer | AKOA |
| Surface | blank |
| Material | Steel |
| Total length | 940 mm |
| Ø Silencer | 60 mm |
| Number of fixing points | 3 pcs |
| Ø Flame tube outside | 30 mm |
| Ø Internal connection | 28 mm |
| Exhaust type | Cone / double cone |
| Mounting type | Nuts |
| Puch | E50 |
Ratings
Accessories & related products
Simonini exhaust aluminum | Puch
Manufacturer: Simonini · Material: Steel · Surface: varnished · Ø Silencer: 60 mm · Ø Internal connection: 23 mm · Mounting type: Welded lug · Ø Flame tube outside: 29 mm · Ø outside: 95 mm · Exhaust type: Cone / double cone · Number of fixing points: 1 pcs · Total length: 830 mm · Flame tube attachment: Flange
EUR 216.70
HOMOET Exhaust P6 Special (longer center section) | Puch
Manufacturer: HOMOET · Material: Steel · Surface: blank · Total length: 935 mm · Ø Silencer: 50 mm · Mounting type: Welded lug · Ø outside: 88 mm · Number of fixing points: 1 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Ø Internal connection: 24 mm · Flame tube attachment: Flange
EUR 345.60
Not in stock
Hot 
HOMOET exhaust P6 blank | Puch
Manufacturer: HOMOET · Material: Steel · Surface: raw · Surface: varnished · Color: gray · Ø outside: 88 mm · Total length: 900 mm · Mounting type: Tab · Ø Silencer: 50 mm · Flame tube attachment: Stud bolts & nuts · Number of fixing points: 2 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone
EUR 333.90
AKOA Exhaust Streetpower "handmade" | Puch Maxi N
Surface: blank · Manufacturer: AKOA · Material: Steel · Ø Internal connection: 28 mm · Ø Silencer: 60 mm · Number of fixing points: 3 pcs · Ø Flame tube outside: 30 mm · Exhaust type: Cone / double cone · Total length: 940 mm · Mounting type: Nuts
EUR 398.40
Explore categories from Exhaust system
Moped fans also bought
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Place of use: Exhaust · Material: Graphite / Graphite · Reinforced: No · Ø inside: 27.4 mm · Ø screw holder: 6.6 mm · Thickness: 3 mm · Ø outlet inside: 28 mm · Hole spacing outlet: 42.5 mm · Area of application: Tuning
EUR 8.70
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Thickness: 1 mm · Ø inside: 106 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.60
swiing® ingenious 45 mm cylinder kit CH12 camouflaged | Puch
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Surface: sandblasted · Displacement: 70 ccm · Material: Aluminum · Crankshaft stroke: 43 mm · Nominal diameter: 45 mm · Ø cylinder neck: 48 mm · Number of fixing points: 4 pcs · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Inlet window: 23 / 21 x 14 · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 25 mm · Hole pattern [mm]: 44 x 44 · Decompressor: No · Hole spacing outlet: 42 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Area of application: Tuning
EUR 117.10
Collection only possible with online purchase and appointment.
