High-quality Streetpower racing muffler for your Puch Maxi N moped / moped.
The racing exhaust, which is handmade in Switzerland, is suitable for cylinder kits with a diameter of 43 - 45 mm and a straight outlet.
The tuning exhaust achieves its maximum performance in the upper speed range. The quality of workmanship corresponds to the standard of RHR exhausts and the performance level is roughly on a par with Homoet exhausts.
Note: If you want to continue using your pedal mechanism, you will need a pedal axle extension.
The main pedal can still be used, but may require minor adjustments.
The surface is bare and untreated. A protective coating is required to protect the exhaust system from rust.
The described axle extension, protective coating and other tuning parts can be found in the accessories section.
Branded product from the manufacturer AKOA.
| Manufacturer | AKOA |
| Material | Steel |
| Surface | blank |
| Total length | 940 mm |
| Ø Silencer | 60 mm |
| Ø Internal connection | 28 mm |
| Ø Flame tube outside | 30 mm |
| Exhaust type | Cone / double cone |
| Mounting type | Nuts |
| Number of fixing points | 3 pcs |
| Puch | E50 |
Accessories & related products
Simonini exhaust aluminum | Puch
Manufacturer: Simonini · Total length: 830 mm · Material: Steel · Surface: varnished · Ø Silencer: 60 mm · Ø Internal connection: 23 mm · Mounting type: Welded lug · Ø Flame tube outside: 29 mm · Exhaust type: Cone / double cone · Ø outside: 95 mm · Flame tube attachment: Flange · Number of fixing points: 1 pcs
EUR 222.10
HOMOET Exhaust P6 Special (longer center section) | Puch
Surface: blank · Manufacturer: HOMOET · Material: Steel · Ø outside: 88 mm · Total length: 935 mm · Mounting type: Welded lug · Ø Silencer: 50 mm · Ø Internal connection: 24 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Flame tube attachment: Flange · Number of fixing points: 1 pcs
EUR 354.30
Not in stock
Hot 
HOMOET exhaust P6 blank | Puch
Surface: raw · Surface: varnished · Manufacturer: HOMOET · Material: Steel · Ø outside: 88 mm · Color: gray · Total length: 900 mm · Mounting type: Tab · Ø Silencer: 50 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Flame tube attachment: Stud bolts & nuts · Number of fixing points: 2 pcs
EUR 342.20
Not in stock
AKOA Exhaust Streetpower "handmade" | Puch Maxi S
Surface: blank · Manufacturer: AKOA · Material: Steel · Total length: 940 mm · Mounting type: Nuts · Ø Silencer: 60 mm · Ø Internal connection: 28 mm · Ø Flame tube outside: 30 mm · Exhaust type: Cone / double cone · Number of fixing points: 3 pcs
EUR 408.30
Not in stock
Moped fans also bought
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Manufacturer: swiing® ingenious parts · Total length: 28 mm · Area of application: Tuning · Material: Spring steel · Color: blue · Surface: coated · Number of components: 3 pcs · Ø wire: 1.7 mm · Ø inside: 4.8 mm · Ø outside: 8.3 mm
EUR 21.50
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2200 mm
EUR 2.90
swiing® revival side protection screw set black | Puch Maxi S
Thread type: M5x0.8 (standard thread) · Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Color: silver · Surface: galvanized (blue) · Surface: raw · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Total length: 47 mm · Thread length: 50 mm · Total length: 60 mm
EUR 15.50
Intake manifold Athena AJH Inox
Manufacturer: Made in Netherlands · Number of fixing points: 4 pcs · Material: Chrome steel (known as Nirosta®) · Area of application: Tuning · Mounting type: Screws · Ø inside: 21 mm · Ø External connection: 24 mm · Hole pattern [mm]: 60 x 40 · Total height: 60 mm
EUR 99.60
swiing® revival stud bolts M6x38 inlet/outlet galvanized (10.9 strength)
Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Manufacturer: swiing® revival parts · Total length: 38 mm · Strength class: 10.9 · Material: Steel · Surface: galvanized (blue) · Thread length: 11 mm · Thread length: 19 mm
EUR 2.40
Collection only possible with online purchase and appointment.
