Hot 
Ready-to-install rope starter for clockwise rotating Puch E50 engines on your Puch Maxi S / N or Puch Supermaxi LG1 moped / moped. Can only be fitted in conjunction with an original Bosch / Ducati ignition.
Made in Switzerland. Designed for the highest loads and proven in racing.
Fitting:
1. Starter pinion: Clean the flywheel, then screw the counterpart for the cable starter onto the pole wheel (secure with Loctite).
2. Pull-wire starter: Position the starter housing correctly and tap lightly with a plastic hammer until the pull-wire starter is perfectly seated. It can then be screwed into place.
Application:
1. Before starting, pull the cable slowly a few times so that the engine turns over empty (must be done before each start attempt).
2. Pull out the cable starter handle until it engages fully and you encounter resistance. Then pull through in one go.
Tip: Wear gloves! Hold the handle firmly.
Note: The pedal mechanism can no longer be operated as the pedal arms would come into contact with the housing of the pull starter. Therefore, footrests, a longer pedal axle or a pedal axle extension must be fitted.
Other helpful parts for the cable starter conversion such as Loctite, racing gloves, replacement cord, rubber mallet etc. can be found in the accessories section. You can find them in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Ø outside | 130 mm |
| Number of fixing points | 2 pcs |
| Hole spacing | 137.5 mm |
| Material | Steel, Plastic |
| Color | Chrome, black-matt |
| Ignition system | BOSCH, DUCATI |
| Width | 150 mm |
| Height | 88 mm |
| Total length | 160 mm |
| Surface | chrome-plated |
| Puch | E50 |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Color: blue · Contents: 10 ml · Area of application: Chemistry · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Temperature resistance (min.): -75 - 200 °C · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25.70
EUR 2’570.00/l
GPO pedal axle with chrome rim | Puch Supermaxi LG1, LG2
Chain pitch: 1/2" x 3/16" · Total length: 257 mm · Manufacturer: GPO · Ø outside: 15.9 mm · Material: Steel · Color: Chrome · Number of teeth: 28 pcs · Surface: chrome-plated · Wavelength from wreath: 41 mm · Wavelength from wreath: 206 mm · Ø Outer sprocket: 120 mm · Ø Pedal arm holder: 15.9 mm · Ø Bearing support: 15.9 mm · Crank (wreath): 7.5 mm
EUR 70.20
Moped fans also bought
- 12 %
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Area of application: Standard · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Surface: galvanized (blue)
EUR 2.80
EUR 2.45
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Ø outside: 5 mm · Number of components: 2 pcs · Material: Brass · Material: Steel · Ø Cable bushing: 1.6 mm · Drive: Slot · Total length: 6 mm · Screw head: Lens head · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
EUR 2.35
GPO 44 mm cylinder head | Puch Maxi S, N / X30 NS, NL, N-2AH
Material: Aluminum · Manufacturer: GPO · Surface: sandblasted · Camouflaged: Yes · Area of application: Tuning · Ø cylinder: 44 mm · Total length: 135 mm · Candle thread: short · Width: 125 mm · Height: 55 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 50.30
Hot
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1600 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 11.60
Collection only possible with online purchase and appointment.
