A supposed 19 mm Bing SRF replica carburetor.
The passage is slightly conical, so that the diameter is 19 mm on the outside, but only slightly larger than 17 mm in the middle.
The carburetor is not of the same quality as original Bing products, but is a good and inexpensive alternative.
Sink block is for nozzles with M4 thread.
ØAir filter screen: 60.2 mm
Connection diameter to intake manifold: 23 mm
Mounted nozzle size: unknown
| Nominal diameter | 17 mm |
| Area of application | Tuning |
| Component group Carburetor | Carburetor complete |
| Carburetor type | SRF |
| Ø Internal connection | 23 mm |
| Ø Inside entrance | 19 mm |
| Ø Output inside | 19 mm |
| Ø Air filter connection | 60.2 mm |
| Mounting type | Plug connection clamped |
| Ø fuel hose connection | 6 mm |
| Choke control | Hand choke |
| Nozzle thread | M4x0.7 (standard thread) |
| Puch |
| Zündapp Belmondo |
| Kreidler |
Ratings
Moped fans also bought
Karcoma fuel tap M12x1 vertical (with union nut) 2 connections
Manufacturer: Karcoma · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: vertical / vertical · Outlet direction: any · Mounting type: Union nut · Spare tube shape: straight · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 50 mm
EUR 33.20
Inox
Hot 
Bumm mirror round Inox
Manufacturer: Bumm · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Test mark: none · Color: Chrome · Surface: chrome-plated · Total length: 360 mm · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Mirror rod length: 300 mm · Clamping diameter: 22 mm · Thread size: M8 · Thread type: M8x1.25 (standard thread)
EUR 33.70
swiing® revival nozzle set M4 (70 - 90) Bing 18, Bing 85
Manufacturer: swiing® revival parts · Material: Brass · Quantity: 11 pcs · Component group Carburetor: Spraying · Carburetor type: 17 Catalyst · Carburetor type: 18 Catalyst · Carburetor type: 85 · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M4x0.7 (standard thread) · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74 · Nozzle size: 76 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 84 · Nozzle size: 86 · Nozzle size: 88 · Nozzle size: 90
EUR 26.40
66HEROES Air filter mushroom grille black Dell'Orto SHA (Ø=60 mm)
Manufacturer: 66HEROES · Material: Metal · Camouflaged: No · Material: Rubber · Color: black · Total length: 46 mm · Filter type: Grille · Length rubber part: 18 mm · Length of filter section: 28 mm · Ø outside: 87 mm · Mounting type: Bride · Mounting type: Plug connection clamped · Area of application: Tuning · Ø Internal connection: 60 mm
EUR 24.00
BAD ASS 17 mm intake manifold (short) Bing SRE | Sachs 503 2AL/2BL
Ø inside: 17.8 mm · Manufacturer: BAD ASS · Material: Aluminum · Hole spacing inlet: 32 mm · Total length: 65 mm · Camouflaged: No · Ø External connection: 20 mm · Area of application: Tuning · Height flange center hole: 45 mm · Total height: 55 mm · Number of fixing points: 2 pcs · Mounting type: Stud bolt
EUR 90.30
swiing® ingenious intake manifold 17 mm SRF | Puch Z50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Total length: 45 mm · Ø External connection: 23 mm · Ø inside: 17 mm · Mounting type: Stud bolts & nuts · Hole spacing inlet: 38 mm · Total height: 73 mm · Height flange center hole: 61 mm · Number of fixing points: 2 pcs · Camouflaged: Yes · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 60.20
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
