Original pole wheel for various mopeds, mopeds and small motorcycles with mechanical breaker ignition and clockwise rotating engine.
The magnetic flywheel can be used for single-automatic engines, e.g. Puch Maxi E50.
Weight: 900 grams
Ø inside: 91.1 mm
Ø outside: 116.5 mm
Matching attachments for the ignition wheel such as ignition plate, interrupter, condenser, ignition coil, ignition plug, etc. can be found in the accessories section.
The following number is stamped on the ignition wheel: 0212124039, 6V22 - 5/10 W
NOS - new from old stock.
| Manufacturer | BOSCH |
| Material | Steel |
| Thread type | MF26x1.5 (fine pitch thread) |
| Direction of rotation | right |
| Ø cone small inside | 11.9 mm |
| Ø Internal flywheel | 91.2 mm |
| Height | 36.6 mm |
| Ø cone large inside | 15 mm |
| Ø Flywheel outside | 115.8 mm |
| Cone length | 17.8 mm |
| Cone ratio | 1:5 |
| Weight | 900 g |
| Thread length | 6.5 mm |
| Puch | E50 |
Accessories & related products
Nut flywheel M10x1 SW15 serrated
Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nut type: Flange nut · Thread type: MF10x1 (fine pitch thread) · Drive: External hexagon · Nominal diameter (thread): 10 mm · Ø outside: 19.8 mm · Height: 10.5 mm · Width across flats: 15 mm
EUR 3.50
Hot 
BOSCH breaker with cable | Bosch / Ducati
Ø mounting hole: 4.5 mm · Manufacturer: BOSCH · Material: Steel · Area of application: Original · Area of application: Standard · Cable available: Yes · Ø axle: 4 mm · Ø Internal flywheel: 90 mm · Cable length: 100 mm · Number of fixing points: 1 pcs · Alternative version of the Pony OEM number: A4606 · Alternative version of the Pony OEM number: A4606A · Pony OEM number: A4607 · Sachs OEM no.: 0283 116 102 · Alternative version of the Sachs OEM number: 0983 106 000 · Alternative version of the Sachs OEM number: 2783 039 001 · BOSCH OEM number: 1 217 013 025 · BERU OEM number: 0 340 100 710
EUR 24.00
BERU Ignition Interrupter with Cable, NOS | Bosch / Ducati
Manufacturer: BERU · Material: Steel · Ø axle: 4 mm · Ø mounting hole: 4.5 mm · Cable available: Yes · Number of fixing points: 1 pcs · Area of application: Original · Area of application: Standard · Cable length: 100 mm · Ø Internal flywheel: 90 mm · Alternative version of the Pony OEM number: A4606 · Alternative version of the Sachs OEM number: 0983 106 000 · BOSCH OEM number: 1 217 013 025 · BERU OEM number: 0 340 100 710
EUR 36.10
Hot
swiing® revival screw-in condenser | Bosch / Ducati
Manufacturer: swiing® revival parts · Ø outside: 18 mm · Capacity: 0.16 µF · Area of application: Original · Area of application: Standard · Thread type: M3x0.5 (standard thread) · Mounting type: Plug connection clamped · Height: 23 mm · Connection type: Thread for screwing · Total height: 32 mm · BOSCH OEM number: 2 207 330 050
EUR 11.90
Hot
DUCATI ignition coil (1A quality)
Manufacturer: DUCATI · Place of use: Internal (in the ignition) · Ø Internal flywheel: 90 mm · Ø cable holder: 5.9 mm · Cable length: 37 mm · Color: black · Total length: 76.5 mm · Height: 17 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 4.6 mm · Hole spacing: 54 mm · Area of application: Original · Area of application: Standard · Alternative version of the Pony OEM number: A2116 · Alternative version of the Pony OEM number: A2118 · Pony OEM number: A2114 · Pony OEM number: A5524 · Alternative version of the Sachs OEM number: 0265 142 002 · Alternative version of the Sachs OEM number: 0265 142 004 · Sachs OEM no.: 0265 132 100 · Sachs OEM no.: 0265 203 001
EUR 120.50
Not in stock
swiing® revival ignition plate 90 mm Bosch / DUCATI
Ø inside: 18.5 mm · Manufacturer: swiing® revival parts · Ø outside: 90 mm · Material: Aluminum · Number of cables: 3 pcs · Tension: 6 V · Cable length: 450 mm · Cable length: 550 mm · Ø bolt circle: 80 mm · Number of fixing points: 4 pcs · Alternative version of the Pony OEM number: A2656 · Alternative version of the Sachs OEM number: 0283 130 004 · Alternative version of the Sachs OEM number: 0286 254 008
EUR 132.60
swiing® revival M10x1 SW14 nut, flywheel flange, CNC-machined, original
Manufacturer: swiing® revival parts · Material: Steel · Surface: burnished · Nut type: Flange nut · Thread type: MF10x1 (fine pitch thread) · Drive: External hexagon · Nominal diameter (thread): 10 mm · Ø outside: 19.8 mm · Height: 10 mm · Width across flats: 14 mm · Alternative version of the Pony OEM number: A4513 · Alternative version of the Sachs OEM number: 0942 072 102 · Alternative version of the Puch OEM number: 901.2943
EUR 8.30
Moped fans also bought
Hot
Wippermann drive chain No.18 (double reinforced)
Material: Steel · Manufacturer: Wippermann · Surface: blank / oiled · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.2 mm · Ø Pin: 4.15 mm · Color: gray
EUR 40.90
swiing® revival side protection screw set black | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Color: black · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Thread length: 13 mm · Thread length: 50 mm · Total length: 24.5 mm · Total length: 63 mm
EUR 14.40
Working late? Evening hours on Thursday until 20:00
