Reproduction of the original Puch E50 gearbox, consisting of a clutch basket and a spur gear suitable for your Puch Maxi and Supermaxi P1 moped / moped with E50 and E50A engine.
The original clutch and starter clutch can be used with this basket.
Normal gear ratio of 19:96 teeth with helical toothing.
The helical-toothed gears run more smoothly than straight-toothed gears.
Clutch basket:
- Welded press fit, no spinning possible, even under higher loads
- Special sliding bush is already press-fitted
Spur gear:
- Spur gear made from cast material
- Slightly more solid design than original
Notes: Clutch basket and spur gear should always be used together. There may be a slight "singing" when the clutch basket is used with the original spur gear. This gearbox is suitable for the 3-bearing and 4-bearing housings. Depending on the tolerances, shims may have to be used so that the gear wheel does not rub against the housing. The clutch basket from MBR should not be used together with this spur gear.
High-quality alternatives can be found in the accessories section.
Original Puch spare part number: 344.1.13.350.0
| Material | Steel |
| Toothing type | helical toothed |
| Recording type | Interlocking |
| Number of teeth | 19 pcs, 96 pcs |
| Area of application | Standard |
| Puch | E50 |
Ratings
Accessories & related products
Moped fans also bought
GPO clutch 3-jaw aluminum | Puch E50
Material: Aluminum · Material: Steel · Ø inside: 12 mm · Ø inside: 14.6 mm · Manufacturer: GPO · Ø outside: 93 mm · Material addition: Composite materials · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 20.9 mm · Area of application: Original · Area of application: Standard
EUR 60.60
GPO gasket set | Puch E50
Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Manufacturer: GPO · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Area of application: Standard · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 12.00
BOSCH screw-in condenser | Bosch / Ducati
Height: 27 mm · Manufacturer: BOSCH · Ø outside: 18 mm · Capacity: 0.2 µF · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Thread type: M3x0.5 (standard thread) · Area of application: Original · Area of application: Standard · Total height: 33.5 mm · Alternative version of the Pony OEM number: A2090 · Pony OEM number: A2092 · Alternative version of the Sachs OEM number: 0265 052 003 · Sachs OEM no.: 0265 052 007 · BOSCH OEM number: 2 207 330 050
EUR 24.20
BOSCH breaker with cable | Bosch / Ducati
Material: Steel · Number of fixing points: 1 pcs · Ø mounting hole: 4.5 mm · Manufacturer: BOSCH · Ø Internal flywheel: 90 mm · Cable length: 100 mm · Cable available: Yes · Ø axle: 4 mm · Area of application: Original · Area of application: Standard · Alternative version of the Pony OEM number: A4606 · Alternative version of the Pony OEM number: A4606A · Pony OEM number: A4607 · Alternative version of the Sachs OEM number: 0983 106 000 · Alternative version of the Sachs OEM number: 2783 039 001 · Sachs OEM no.: 0283 116 102 · BOSCH OEM number: 1 217 013 025 · BERU OEM number: 0 340 100 710
EUR 24.20
GPO front mudguard strut 17" chrome
Material: Steel · Color: Chrome · Number of fixing points: 4 pcs · Ø mounting hole: 12.5 mm · Manufacturer: GPO · Outer width: 160 mm · Surface: chrome-plated · Distance mudguard - center hole: 300 mm · Mounting type: Nuts & bolts · Total length: 305 mm · Wheel size: 17 "
EUR 18.10
DUCATI ignition coil (1A quality)
Color: black · Total length: 76.5 mm · Height: 17 mm · Number of fixing points: 2 pcs · Ø mounting hole: 4.6 mm · Manufacturer: DUCATI · Place of use: Internal (in the ignition) · Ø Internal flywheel: 90 mm · Ø cable holder: 5.9 mm · Cable length: 37 mm · Mounting type: Screws · Hole spacing: 54 mm · Area of application: Original · Area of application: Standard · Pony OEM number: A2114 · Alternative version of the Pony OEM number: A2116 · Alternative version of the Pony OEM number: A2118 · Pony OEM number: A5524 · Alternative version of the Sachs OEM number: 0265 142 002 · Alternative version of the Sachs OEM number: 0265 142 004 · Sachs OEM no.: 0265 132 100 · Sachs OEM no.: 0265 203 001
EUR 78.80
Not in stock
swiing® ingenious crankshaft "High End" | Tomos Classic, Quadro, Sprint, Fun Sport'R
Manufacturer: swiing® ingenious parts · Area of application: Racing · Cheek type: Full cheeks · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 93 mm · Total length crankpin ignition side: 64 mm · Ø crank webs: 70 mm · Thread type: MF10x1 (fine pitch thread) · Ø piston pin (B): 12 mm · Wide crank webs: 34 mm · Tomos OEM number: 223421
EUR 163.80
Not in stock
Collection only possible with online purchase and appointment.
