
Bearing set and oil seal set for the Puch Maxi 1-speed E50 engine (new model).
This bearing set can be installed in the Puch Maxi S, N, and Supermaxi LG1 with catalytic converter engine, among others.
All ball bearings are from the high-quality NTN brand with standard clearance (not C3).
The shaft seals (commonly known as Simmerrings) are double-lipped.
Note: Suitable for crankshafts that do not have an enlarged oil seal seat on the clutch side and have a bearing with an 11 mm inner ring (as shown in Figure 2).
A nostalgic product from the swiing® brand that meets the highest standards.
| Manufacturer | swiing® revival parts |
| Number of components | 7 pcs |
| Area of application | Tuning |
| Puch | E50 |
Accessories & related products
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Decompressor: Yes · Hole pattern [mm]: 44 x 44
EUR 11.90
swiing® revival Screw Set, Engine, Galvanized, Small | Puch E50
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: Cross recess · Drive: Hexagon socket · Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Puch OEM number: 900.1216 · Puch OEM number: 901.1308
EUR 11.90
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Material: Silicone · Color: gray · Contents: 70 ml · Area of application: Chemistry · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Gap dimension (max.): 2 mm · Temperature resistance (min.): -60 - 315 °C
EUR 24.00
EUR 342.86/l
swiing® revival ball bearing puller L17 / BO15 / E15 / E20 / 6203 / 6202
Manufacturer: swiing® revival parts · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: E20 · Peel-off tray: L17 · Peel-off tray: 6202 · Peel-off tray: 6203 · Material: Steel · Surface: galvanized (blue) · Surface: gas nitrided · Number of components: 3 pcs · Area of application: Special tool
EUR 48.10
Explore categories from Seals & gaskets
Moped fans also bought
GPO 3-Jaw Clutch "Original" | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Steel · Material addition: Composite materials · Area of application: Original · Area of application: Standard · Number of jaws: 3 pcs · Ø inside: 12 mm · Ø inside: 14.6 mm · Thickness: 20.9 mm · Recording type: Cone mounting · Number of springs: 3 pcs · Ø outside: 93 mm
EUR 60.20
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Decompressor: Yes · Hole pattern [mm]: 44 x 44
EUR 11.90
swiing® revival oil filler plug with sealing ring | Puch E50
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Number of components: 2 pcs · Total length: 14.6 mm · Drive: Slot · Screw head: Lens head · Ø External head: 14 mm · Thread type: M10x1.5 (standard thread) · Nominal diameter (thread): 10 mm · Thread length: 6 mm · Puch OEM number: 364.1.10.660.1
EUR 4.70
swiing® revival Stud Bolt Set M6x106 | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 106 mm · Drive: External hexagon · Thread type: M6x1 (standard thread) · Diameter: 5.9 mm · Nominal diameter (thread): 6 mm · Width across flats: 10 mm · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.95
swiing® revival Screw Set, Engine, Galvanized, Small | Puch E50
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: Cross recess · Drive: Hexagon socket · Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Puch OEM number: 900.1216 · Puch OEM number: 901.1308
EUR 11.90






