Tool to block the piston on your moped, moped and small motorcycle.
Screws into the spark plug thread so that the piston is in contact. The nut of the flywheel or clutch can then be loosened without any problems.
Thread: M14x1.25
Wrench size: 17 mm
Material: Steel, galvanized
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Width across flats SW | 17 mm |
| Manufacturer | GPO |
| Material | Steel |
| Surface | galvanized (blue) |
| Number of components | 1 pcs |
| Diameter | 12 mm, 16 mm |
| Total length | 83 mm |
| Area of application | Special tool |
| Thread type | MF14x1.25 (fine pitch thread) |
| Puch | |
| Sachs | |
| Pony / Cilo (Beta 521 & 512) | |
| Piaggio | |
| Zündapp Belmondo | |
| Solex | |
| Tomos | |
| Bye Bike | |
| Alpa Chopper / Turbo | |
| Cilo |
| DKW | |
| Fantic | |
| Garelli | |
| Honda | |
| Hercules | |
| ILO / JLO | |
| Kreidler | |
| Malaguti | |
| MBK | |
| Miele | |
| Motobecane | |
| Monark | |
| Peugeot | |
| Victoria | |
| Yamaha | |
| Zündapp | |
| Franco Morini |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Material: Steel · Surface: burnished · Total length: 130 mm · Manufacturer: GPO · Number of components: 7 pcs · Area of application: (Dis)assembly tool · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm
EUR 23.90
Moped fans also bought
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Number of components: 1 pcs · Total length: 55 mm · Total length: 75 mm
EUR 11.90
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Nipple length: 5 mm
EUR 3.35
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Material: Steel · Surface: galvanized (blue) · Surface: rubberized · Total length: 290 mm · Height: 80 mm · Thickness: 5 mm · Manufacturer: swiing® ingenious parts · Ø outside: 93 mm · Number of components: 1 pcs · Ø inside: 27 mm · Area of application: Special tool · Diameter: 19 mm · Ø Pin: 8 mm
EUR 57.60
Collection only possible with online purchase and appointment.
