Clutch puller with thread protection sleeve for your Puch Maxi moped / moped with E50 engine.
The galvanized steel clutch puller is easy to use and a must for every Puch workshop.
Use the cylinder screws to secure the tool to the clutch pack. By screwing in the large hexagon head screw, you can remove the entire clutch.
You can find clutches and springs in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Material | Steel |
| Surface | blackened |
| Area of application | (Dis)assembly tool |
| Universal | |
| Puch | E50 |
Ratings
Accessories & related products
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Total length: 28 mm · Color: blue · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Area of application: Tuning
EUR 21.00
HK clutch "Racing" Aramid | Puch E50
Manufacturer: HK Clutches · Material: Steel · Material addition: Chrome steel (colloquially known as stainless steel) · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs
EUR 351.50
HK clutch "Racing" (with additional weight) Aramid | Puch E50
Ø inside: 12 mm · Ø inside: 14.6 mm · Manufacturer: HK Clutches · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Material addition: Composite materials · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 21.2 mm · Ø outside: 93 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 492.10
swiing® ingenious clutch springs reinforced (+50%) | Puch E50
Spring design: Pressure spring · Ø wire: 2 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: red · Total length: 26.6 mm · Ø outside: 8.45 mm · Ø inside: 4.3 mm · Number of components: 3 pcs · Area of application: Tuning
EUR 21.00
swiing® ingenious clutch springs reinforced (+60%) | Puch E50
Spring design: Pressure spring · Ø wire: 2.05 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: yellow · Total length: 26.9 mm · Ø outside: 8.45 mm · Ø inside: 4.3 mm · Number of components: 3 pcs · Area of application: Tuning
EUR 21.00
swiing® ingenious screw M12x1.25 x 51 hexagonal ball end & cap
Drive: External hexagon · Screw head: Hexagon · Manufacturer: swiing® ingenious parts · Area of application: Special tool · Material: Steel · Area of application: Workshop accessories · Surface: galvanized (blue) · Thread type: MF12x1.25 (fine pitch thread) · Width across flats: 19 mm · Thread length: 42 mm · Number of components: 1 pcs
EUR 10.40
Explore categories from Clutch
Moped fans also bought
GPO clutch 3-jaw aluminum | Puch E50
Manufacturer: GPO · Material: Aluminum · Area of application: Original · Area of application: Standard · Material: Steel · Material addition: Composite materials · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Thickness: 20.9 mm
EUR 58.50
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Total length: 28 mm · Color: blue · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Area of application: Tuning
EUR 21.00
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Number of components: 1 pcs · Material: Steel · Area of application: (Dis)assembly tool · Total length: 55 mm · Total length: 75 mm · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Strength class: 8.8
EUR 11.60
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Number of components: 7 pcs · Decompressor: Yes
EUR 11.60
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Material: Sealing paper · Manufacturer: swiing® revival parts · Ø outside: 116 mm · Ø inside: 106 mm · Thickness: 1 mm · Number of fixing points: 4 pcs · Color: sand-colored · Number of components: 1 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.60
Collection only possible with online purchase and appointment.
