Hot 
Complete LELEU brake plate suitable for the front wheel on Puch Maxi S & N, X30 Sport NS, NL & NG, Velux X30 moped / moped as well as some Peugeot models with 12 mm wheel axle.
The support plate is suitable for LELEU cast rims and wire spoke wheels.
The brake anchor plate was reproduced in a small series with the old casting tools and thus corresponds to the original from times gone by.
In addition, the anchor plate was equipped with high-quality NewFren brake pads.
An alternative brake plate for 11 mm axles and a matching wheel hub can be found in the accessories section.
Quality product from the French manufacturer LELEU.
Original Puch spare part number: 349.1.40.007.2 / 349.1.40.807.9
| Manufacturer | LELEU |
| Material | Aluminum |
| Ø drum | 80 mm |
| Ø axle | 12 mm |
| Ø bore | 12.1 mm |
| Puch OEM number | 349.1.40.007.2, 349.1.40.807.9 |
| Puch |
Ratings
Accessories & related products
GPO brake anchor plate front 11 mm axle (1A quality) | Puch Maxi S, N / X30 Sport NS, NL / Velux
Manufacturer: GPO · Material: Aluminum · Ø External brake pads: 80 mm · Ø axle: 11 mm · Ø outside: 95 mm · Ø bore: 11.3 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 78 mm · Thread size: M6
EUR 72.20
Hot
LELEU wheel hub spoke wheel front 36 holes with anchor plate & axle | Puch
Ø outside: 115 mm · Manufacturer: LELEU · Material: Aluminum · Ø drum: 80 mm · Axle length: 160 mm · Ø axle: 11 mm · Thread type: MF11x1 (fine pitch thread) · Area of application: Original · Number of spoke holes: 36 pcs · Ø spoke hole: 3.7 mm
EUR 192.90
Explore categories from Hub & axle
Moped fans also bought
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Color: black · Ø bolt circle: 105.5 mm · Number of teeth: 45 pcs · Number of fixing points: 6 pcs · Thickness: 4.5 mm · Ø inside: 94 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Hole spacing: 36.5 mm · Ø mounting hole: 6.7 mm
EUR 24.00
swiing® revival wheel axle LELEU & Grimeca wheel hub cast wheel rear | Puch
Ø outside: 11.8 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Total length: 185 mm · Ø shaft: 11.9 mm · Width across flats: 19 mm · Thread length: 26 mm · Thread length: 52.5 mm · Shank length: 100 mm
EUR 18.00
swiing® revival screw set sprocket mounting Inox | Puch Maxi
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Thread type: M6x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Width across flats: 10 mm · Thread length: 22 mm · Shank: No · Number of components: 24 pcs · Color: gray
EUR 15.60
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø outside: 91 mm · Ø External brake pads: 80 mm · Ø axle: 12 mm · Ø shaft: 10 mm · Ø bore: 12.2 mm · Ø screw holder: 6.5 mm · Wide cam holder: 12 mm · Total length: 187 mm · Brake lever length (lever length): 55 mm · Cranking (offset): 8 mm
EUR 84.30
swiing® revival rear brake anchor plate | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø outside: 92 mm · Ø External brake pads: 80 mm · Ø axle: 12 mm · Ø shaft: 10 mm · Ø bore: 12.2 mm · Ø screw holder: 6.5 mm · Wide cam holder: 12 mm · Total length: 135 mm · Brake lever length (lever length): 68 mm · Cranking (offset): 10 mm
EUR 90.30
swiing® revival wheel axle set M12x1 x 165 mm cast & spoke hub | Puch
Diameter: 12 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.95 mm · Width across flats: 19 mm · Total length: 165 mm · Shank length: 75 mm · Thread length: 40 mm · Thread length: 50 mm
EUR 36.10
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
